Made for professionals, designed for wood. One coat of oil. Done. Thanks to High-Solid. Whether used on floor, stairs, or furniture – as long as it's wood. An oil that protects where it should: in the wood. OLI-NATURA HS Profiöl is solvent-free. What goes into the wood stays in the wood. No evaporation. That's why in most cases: 1 x oiling is enough. 100% natural oil. A plant-based oil mixture made from linseed oil and tung oil – long open time, deep penetration, breathable, velvety to the touch, matte look. Enhances the natural structure of the wood and provides a finish that feels as natural as it looks. Already excellent as 1K. Even stronger as 2K. For those who want to boost it, add the OLI-NATURA Hardener: 10:1 mix for faster curing, denser cross-linking, and extra resistance – ideal for kitchen countertops, bathroom furniture & similar high-use surfaces, especially with fine sanding (> 180 grit) or when time is of the essence. Tested? Thoroughly.OLI-NATURA HS Profiöl meets the highest requirements for environment, safety, and indoor air: DIBt-approved, low-emission (AgBB), TRGS-compliant, GISCODE Ö10+ (BG BAU), and baubook-declared. Additionally, food contact safe (LFGB), toy safe (EN 71-3), as well as saliva & sweat resistant (DIN 53160) – and slip-resistant according to EN 16165, Class R10/R11 for safe floors and stairs.

RAW WOOD LOOK. ALMOST LIKE UNTREATED. Inspired by Scandinavian living styles, OLI NATURA® Scandic-Oil FOR FURNITURE preserves the natural expression of light woods. The typical darkening of the wood is reduced, its natural color is largely retained, and the surface appears almost freshly sanded. Its high light stability helps slow down darkening and yellowing – while providing reliable everyday protection. Even on deep-brushed and structured oak, pigment deposits in the pores remain almost invisible. This creates a calm, natural raw wood look without a limed effect. When is OLI NATURA® Scandic-Oil FOR FURNITURE the right choice? If you want to protect light wooden furniture or stairs, where the freshly sanded character should be preserved as much as possible. Scandic-Oil FOR FURNITURE is particularly suitable for modern raw wood surfaces where a classic oil would darken too much. For wooden floors, use OLI NATURA® Scandic-Oil CLASSIC. What is OLI NATURA® Scandic-Oil FOR FURNITURE suitable for? The raw wood effect oil is suitable for the protective treatment of solid wood surfaces in indoor living areas – from furniture and tabletops to stair treads, wall panels, and moldings. It is particularly suitable for untreated light softwoods and hardwoods such as oak, ash, spruce, or fir. For heavily used areas, 2K application with OLI NATURA® H2O-Hardener is recommended. What does wood look like after OLI NATURA® Scandic-Oil FOR FURNITURE? The natural color of the wood is largely retained. The pores are not whitened – for a natural raw surface without a limed effect, which visually and haptically resembles freshly sanded wood. The surface effect can be specifically influenced with optional additional work steps. The impregnation can be refreshed repeatedly by re-oiling with OLI NATURA® Refresher. A test area on the original wood is recommended. 20 ml samplers are available for this purpose. How easy is OLI NATURA® Scandic-Oil FOR FURNITURE to apply? The raw wood effect oil is applied in two coats to raw wood – with a brush, roller, or spray method. Since the water content can raise wood fibers, a light intermediate sanding is recommended after the first coat. By polishing the still-wet second coat with a pad, the surface becomes duller, and layer and streak formation are counteracted. For initial care or an optional third coat, OLI NATURA® Refresher can be used. When is 2K application recommended?For heavily used surfaces, Scandic-Oil FOR FURNITURE is processed with OLI NATURA® H2O-Hardener in a ratio of 10:1. The additional cross-linking increases resistance to water, grease, and common household stresses. For tabletops and surfaces with anticipated grease splashes, 2K application should always be used. What else distinguishes OLI NATURA® Scandic-Oil FOR FURNITURE? VOC-free, low-odor, and tested for indoor use. The raw wood effect oil contains no volatile organic solvents, complies with DIN EN 71-3, is saliva and perspiration resistant according to DIN 53160, DIBt-approved, and baubook-declared. Oil-soaked pads and rags are not prone to spontaneous combustion.

Wood can take on color – and still remain wood. Three functions. One product. OLI-NATURA® COLOUR Hard Wax Oil is a pigmented oil-wax combination. Vegetable oils impregnate the wood from the inside, carnauba wax additionally protects the surface, and lightfast color pigments provide a natural, transparent color effect. Color and protection in one step. Open-pored, robust, and without a lacquer-like finish – for natural wood surfaces indoors. Which woods and applications are suitable for OLI-NATURA® COLOUR Hard Wax Oil? OLI-NATURA® COLOUR Hard Wax Oil is the right choice when the color of the wood needs to be changed and protected at the same time – without prior staining and subsequent separate finishing. This saves an additional work step. Whether for furniture, dining tables, kitchen countertops, stairs, doors, wall paneling, or windowsills – the pigmented hard wax oil is suitable for almost all wood types and wood-based materials indoors, including solid wood, glulam, veneer, plywood, multiplex, OSB, bamboo, and cork. Should light woods remain as light as possible? Cotton White reduces the natural darkening effect and yellowing – ideal for a bright Scandinavian look. Light White visibly brightens even further. For colorless protection, OLI-NATURA® Hard Wax Oil Natural is the suitable choice. What does wood look like after OLI-NATURA® COLOUR Hard Wax Oil? The natural wood appearance is preserved. Grain and structure remain visible and tangible – only the color changes. The subsequent color effect results from the interplay of wood and oil. Wood type, inherent color, and sanding determine how the same color tone will appear. Therefore, a sample on the original wood provides the most reliable representation of the color. All color tones are also available as samplers. Cotton White reduces the natural darkening and yellowing on light woods. Light White visibly brightens further. Dark color tones appear stronger on light woods, while light color tones appear correspondingly more subtle on dark woods. All color tones are intermixable and can be individually softened with OLI-NATURA® Hard Wax Oil Natural. A second coat intensifies the color effect; with OLI-NATURA® Hard Wax Oil Natural, it is maintained. Lightfast color pigments slow down the natural color change of the wood due to UV light and help to preserve the color effect for as long as possible. How easy is OLI-NATURA® COLOUR Hard Wax Oil to apply? It is easy and uniform to apply. For furniture, one coat is usually sufficient. For stairs and heavily used countertops, a second coat is recommended – without intermediate sanding. Hard wax oil is not a lacquer. Apply thinly – that's enough. The surface is durable, dirt- and water-repellent, and easy to maintain. Scratches and signs of wear can be selectively repaired or simply refreshed at any time – without sanding. The oil does not crack, peel, or flake. If the color is to be maintained, the second coat should be applied with OLI-NATURA® Hard Wax Oil Natural. What can you rely on with OLI-NATURA® COLOUR Hard Wax Oil? After complete curing, the surface is safe for humans, animals, and plants. It remains open-pored and breathable, contributing to a pleasant indoor climate. Suitable for children's toys. For kitchen countertops, OLI-NATURA® Hard Wax Oil Natural is recommended as a topcoat.

Boiled linseed oil is "New Old School" - an almost forgotten traditional coating that was once commonly used for wooden surfaces and building elements - both indoors and outdoors. In 2015, we rediscovered the traditional recipe, carefully developed it further, and had it tested for contact with food. Today, boiled linseed oil is one of the most original ways for many manufacturers and wood lovers to naturally protect wood: for cutting boards, end grain, kitchen wood, turned works as well as bowls, knife handles, toys, bird & bee houses, windows and doors. Our boiled linseed oil is produced in a gentle cooking process exclusively from pure, cold-pressed linseed oil. For faster and more uniform drying, we only add a minimal amount of a modern drying agent to the recipe. Further additives and solvents are taboo. Moreover: our boiled linseed oil is LFGB-tested and suitable for wooden surfaces with food contact. After application, the boiled linseed oil forms a permanent bond with the wood and creates a water-repellent layer. The application remains deliberately simple: apply generously with a cotton cloth or brush, let it soak in briefly, and wipe off excess oil. After sufficient drying, the application can be repeated several times. Usually, two to three coats are sufficient. The wood appears livelier, warmer, and richer in tone. Light woods develop a natural honey tone.

OLI NATURA® Hard Wax Oil for almost all interior wood surfaces Oil impregnates. Wax protects. OLI NATURA® Hard Wax Oil is the ECARF-certified oil-wax combination for almost any interior wood project. The oil impregnates the wood from the inside, while the wax additionally protects the surface with a fine protective film. Which types of wood and applications is OLI NATURA® Hard Wax Oil suitable for?  OLI NATURA® Hard Wax Oil is the right choice if you are looking for a classic hard wax oil that can be used for almost all interior wood projects – instead of having a different wood oil in the cupboard for each application. Whether it's furniture, dining tables, kitchen worktops, stairs, doors, wall paneling or window sills – the oil-wax combination is suitable for almost all types of wood and wood-based materials, including maple, beech, oak, ash, spruce and pine, as well as cork, bamboo, OSB, plywood and multiplex. The hard wax oil is particularly suitable if light woods are only to be subtly deepened in color and you want an easy-to-apply, open-pored and repair-friendly surface. Do you want a transparent colored look? Then choose OLI NATURA® COLOUR Hard Wax Oil – also in Cotton White for the popular Scandi look. Do you prefer the stronger color deepening of a classic impregnating oil? Then OLI NATURA® Project Oil is the right choice. What does wood look like after OLI NATURA® Hard Wax Oil? The natural wood look is preserved. Grain and structure are subtly highlighted, and the surface remains open-pored and tactile. The subtle color deepening harmoniously brings out particularly light wood species. The result is a silky matte finish. For an even more matte appearance, the surface can be polished during the wet phase with a white oil pad. How easy is OLI NATURA® Hard Wax Oil to apply? The oil-wax combination can be applied easily and evenly. For furniture, one coat is usually sufficient. For stairs and heavily used worktops, a second coat is recommended – without intermediate sanding. Hard wax oil is not varnish. Apply thinly – that's enough. The surface is durable, dirt and water repellent, and easy to care for. Scratches and signs of wear can be repaired locally or simply refreshed at any time – without sanding. The oil does not crack, peel, or flake. What can you rely on with OLI NATURA® Hard Wax Oil? After complete curing, the surface is harmless to humans, animals, and plants. Tested for everyday use: ECARF-certified (allergy-friendly), food contact-tested (LFGB), suitable for children's toys, and approved by building authorities.

May we introduce? OLI-AQUA NORDIC Raw Wood Effect Varnish – the ultra-matt bio-acrylate water-based varnish for all who love wood as it is. It protects light solid woods and veneers indoors without visibly changing their natural color. Perfect for furniture, cabinets, doors, stairs, or kitchen fronts. The ultra-matt finish makes wood appear raw and untouched – velvety in look, pleasant to the touch. Environmentally friendly, healthy for living spaces, and low-odor, NORDIC represents a new generation of water-based varnishes: easy to apply, fast-drying, non-yellowing, and durable. P.S.: Safety first – the varnish is flame retardant (DIN EN 13501-1) and also suitable for children's toys.👉 Pro tip: For extra durability, combine with OLI-AQUA Hardener 13.2.

OLI-NATURA Worktop-Oil BLACKLABEL Worktop Oil for Wood and Wood-Epoxy Surfaces From the Blacklabel Edition. Developed with Jungo Design – for worktops, tables, bathroom furniture, and modern wood and wood-epoxy surfaces. Worktop-Oil protects and saturates wood in just one application. The 100% high-solid formulation based on linseed oil and tung oil ensures maximum wood saturation, intense color enhancement, and a resistant, water-repellent surface. Highly transparent – for a natural wood look without streaking. The pigment-free oil enhances the natural wood color, accentuates grain and texture, and provides a matte, tactile finish with high everyday usability. Ideal for table tops, worktops, solid wood furniture, bathroom furniture, and river tables. For wood-epoxy surfaces, fine sanding, or applications with increased moisture exposure, OLI-NATURA Hardener (5:1) can optionally be used.Tip for professionals: For maximum durability, OLI-NATURA Worktop-Oil 2C is available as a pre-packaged 2K set (500 ml oil + 100 ml hardener) in the distinctive BLACKLABEL round tin.

TEAK OIL & DECKING OIL FOR OUTDOOR WOOD Sun and rain change wood. Even weather-resistant woods like teak fade and turn grey over time. Regular oiling with OLI NATURA® Yacht & Teak Oil counteracts the silver-grey patina and helps protect the wood surface from drying out and becoming brittle. The oil penetrates deep into the wood and protects from within. The surface remains open-pored and water-repellent, and the colour and grain are visibly refreshed – without a sealed film layer. Which woods and applications are suitable for OLI NATURA® Yacht & Teak Oil? For wooden decks, decking boards, garden furniture, pool surrounds and yacht decks made of suitable outdoor woods such as teak, bangkirai, Douglas fir, larch, eucalyptus, robinia, oak, ipé or cumaru. The right choice if the warm wood character is to be preserved and visibly enhanced, and you are looking for a biocide-free wood oil for outdoor use. A particular advantage is the easy maintenance: The oil penetrates the wood and remains open-pored. The oil coating does not crack, peel, or flake. Therefore, already oiled surfaces can usually be re-oiled easily without sanding. What does wood look like after OLI NATURA® Yacht & Teak Oil? The oiling gives the wood depth and warmth. Colour and grain become more prominent, and the surface remains open-pored and natural to the touch. Natural is pigment-free, but not optically colourless: like any enhancing oil, it deepens the existing wood tone. Teak is lightly pigmented, subtly supports warm wood tones, and offers increased UV protection. The colour Teak is also suitable for other wood types without changing them to an opaque teak tone. Wood type, natural colour, and sanding affect the colour tone. A sample on the original wood shows it most reliably. All colours are available as samplers. How easy is OLI NATURA® Yacht & Teak Oil to apply? Apply thinly, let it soak in, remove excess. Apply the oil evenly in the direction of the grain and polish completely after about 15 minutes. Only apply to clean, dry wood. Protect the freshly oiled surface from rain and moisture for 5–8 days afterwards. Very dry or highly absorbent wood can be oiled a second time after drying overnight. Treat dense woods like teak only thinly. One application is usually sufficient for refreshing. Already oiled surfaces can usually be maintained without sanding. Depending on the weather and use, a refresh once a year is usually sufficient, or twice if the wood is exposed to the elements. What can you rely on with OLI NATURA® Yacht & Teak Oil? Proven for many years. We have been producing OLI NATURA® Yacht & Teak Oil for over 20 years with almost no changes. We deliberately formulate it without biocides and preservatives. Therefore, the wood oil is not only suitable for outdoor use but also for suitable wood surfaces indoors.

MAINTAINING & RE-OILING WOODEN GARDEN FURNITURE Sun, rain, and use will eventually leave their marks on wooden garden furniture. Color and grain fade, and the surface can appear dry and rough. The OLI NATURA® Care Set No. 5 contains everything you need to refresh and re-oil oiled garden furniture – compactly assembled and perfectly coordinated. What is included in the OLI NATURA® Care Set No. 5? 250 ml OLI NATURA® Yacht & Teak Oil in Teak – for refreshing the warm wood tone and for regular maintenance. 2-in-1 Sanding Sponge – for smoothing rough spots and raised wood fibers. Brush – for a thin, even application of oil. Polishing Pad – for working in and polishing the oil. Oil Absorbent Cloth – for safely removing excess oil. Which garden furniture is the care set suitable for? For garden tables, garden chairs, wooden benches, garden loungers, and other outdoor furniture made of hardwood, exotic wood, and suitable outdoor woods such as teak, bangkirai, eucalyptus, or robinia. Ideal for refreshing already oiled wood – usually without complete sanding. How easy is the application? Clean the wood and let it dry completely. If necessary, smooth rough spots with the sanding sponge. Apply a thin layer of oil, let it soak in for about 15 minutes, and completely remove any excess. Then polish with the polishing pad. Everything included for easy aftercare – from smoothing to the finished oil application.

May we introduce? NORDIC B – the ultra-matte premium colored lacquer in 15 trendy shades. Based on water-based bio-acrylates, it is perfect for furniture, doors, kitchen fronts, stair cladding, or skirting boards – and even for children's furniture. Upcycling made easy: Old furniture or IKEA classics get a new, modern look with NORDIC B. Chalk look meets lacquer durability: The finish looks like chalk paint but is a more durable lacquer. Primer & topcoat in one saves time and money. Ultra-matte & highly opaque: Only two coats are sufficient for full coverage. The ultra-matte soft-touch finish looks powdery-velvety, is pleasant to the touch, and has a practical anti-fingerprint effect – perfect for kitchens, furniture & co. Sustainable & harmless: With biogenic raw materials from vegetable oils, mineral color pigments, and a water-based formula. 👉 Pro tip: For extra durability, combine with OLI-AQUA Hardener 13.2.

OLI-NATURA Worktop-Oil 2C BLACKLABEL 2K Worktop Oil for Wood and Wood-Epoxy Surfaces From the Blacklabel Edition. Developed with Jungo Design – for river tables, epoxy resin tables, wood-epoxy worktops, as well as other high-quality wood and wood-epoxy projects. The pre-packaged 2K system consisting of 500 ml Worktop-Oil and 100 ml Hardener combines the requirements of wood and epoxy resin in a consistent surface concept. The 100% high-solid formulation based on linseed oil and tung oil ensures maximum wood saturation, intensive accentuation, and a resistant, water-repellent surface. The chemically cross-linking oil-hardener system increases resistance, especially against moisture exposure and the fine sanding often found in wood-epoxy applications. Set to high transparency – for a natural wood look without a hazing effect. The pigment-free system can be applied over the entire wood and epoxy resin surface. After polishing the resin areas, an optically and haptically homogeneous surface is created without disruptive transitions between wood and epoxy resin. Ideal for river tables, epoxy resin tables, wood-epoxy worktops, designer furniture with resin inlays, as well as high-quality objects and unique pieces. Result: Matt, tactile finish with natural depth effect, high transparency, and excellent suitability for everyday use.