Oils & Waxes

OLI NATURA® Boiled Linseed Oil for Wood: traditional wood finishing from our Heritage Collection “New Old School” - a nearly forgotten classic, reimagined. In the past, boiled linseed oil was a standard finish for wooden surfaces and building components - both indoors and outdoors. In 2015, we revived the traditional formula, refined it carefully, and had it tested for contact with food. Today, »OLI NATURA Boiled Linseed Oil« represents one of the most original ways to protect wood naturally. It penetrates deeply, cures within the wood, and forms a durable, water- and dirt-repellent oil film. The surface remains breathable, does not crack or peel, and can easily be maintained and refinished when needed. Which wood surfaces is OLI NATURA® Boiled Linseed Oil suitable for? The transparent boiled linseed oil is suitable for the natural initial treatment of absorbent wood surfaces indoors and outdoors. It protects cutting boards, end grain, kitchen wood, turned woodwork, bowls, and knife handles, as well as wooden toys, birdhouses and bee houses, windows, and doors. The boiled linseed oil is solvent-free, suitable for children's toys, and LFGB-tested and suitable for wood surfaces that come into contact with food. How does OLI NATURA® Boiled Linseed Oil affect wood? OLI NATURA Boiled Linseed Oil is transparent and unpigmented, but it enhances the wood: the color and grain visibly gain depth, making the wood appear more vibrant, warmer, and richer. Particularly light-colored woods develop a natural honey tone. Since the color effect depends on the type of wood and its base tone, we recommend testing the product first in an inconspicuous area. How is OLI NATURA® Boiled Linseed Oil applied? Apply the boiled linseed oil thinly and evenly with a cotton cloth or brush. After the penetration time, carefully remove any excess oil and repeat the application after it has dried sufficiently. Two to three coats are usually enough. What distinguishes the traditional formula? Our purity standard for boiled linseed oil: pure, cold-pressed linseed oil, gently boiled and with only as much drying agent as necessary. It accelerates and evens out curing. We deliberately dispense with additional additives and solvents.

SMOOTH. OIL. PRESERVE FOR LONGER. Everything cutting board enthusiasts need for natural wood care: The OLI NATURA® Care Set No. 4 combines high-quality boiled linseed oil with practical accessories for smoothing, oiling and refreshing. The sanding sponge smooths rough areas and minor signs of use. The boiled linseed oil penetrates deep into the wood, refreshes the color and grain, and protects the surface from moisture. Pads and the oil-absorbing cloth make clean application easier. One set. For initial treatment and ongoing care. What is the OLI NATURA® Care Set No. 4 suitable for? For cutting boards, end-grain boards, bread and serving boards, knife handles and other kitchen utensils made of absorbent wood. The Care Set is suitable for the initial treatment of raw or completely sanded wooden surfaces and for the regular ongoing care of kitchen wood already treated with boiled linseed oil. Rough, faded or dry-looking surfaces regain their pleasantly smooth feel and warm, natural wood character. What does the OLI NATURA® Care Set No. 4 contain? 250 ml OLI NATURA® boiled linseed oil 1 P220 sanding sponge 2 white application pads 1 oil-absorbing cloth 1 care flyer with instructions and cleaning tips How is the OLI NATURA® Care Set No. 4 used? Smooth. Oil. Wipe off. If necessary, lightly sand the clean, completely dry wood with the sanding sponge and carefully remove all dust. Then apply the boiled linseed oil sparingly and evenly with a white pad. After the absorption time, completely remove excess oil with the oil-absorbing cloth. For ongoing care, a sparing application is generally sufficient. Raw or completely sanded wood requires several thin coats, depending on the type of wood and its absorbency. Why is boiled linseed oil suitable for caring for cutting boards? Boiled linseed oil is a proven classic in wood care. It penetrates deep into the wood fibers, enhances the color and grain, and forms a durable, water-repellent surface. Particularly absorbent end grain benefits from the deep-penetrating oil treatment. OLI NATURA® boiled linseed oil is vegan, solvent-free and, once fully cured, suitable for wooden surfaces that come into contact with food. The treated surface remains breathable and can easily be refreshed when needed. All components of the set are coordinated and ready to use - for your own kitchen or as a thoughtful gift for people who want to preserve quality wood for a long time

OLI NATURA® Furniture Wax for Wood: Traditional Wax Care, Reinterpreted for Today A classic from our Heritage Collection, reimagined. For generations, natural waxes have preserved the beauty of valuable furniture and antiques. »OLI NATURA Furniture Wax« continues this tradition with beeswax and carnauba wax, interpreted for today. The solvent-free hard wax gives wood a velvety feel and protects it with a fine, water-repellent wax layer. Applied thinly and polished after drying, it develops a soft to silky sheen. Which wood surfaces is OLI NATURA® Furniture Wax suitable for? The colorless, unpigmented wood wax is suitable for the initial treatment of raw wood and for caring for oiled, stained, or waxed wood surfaces indoors. It enhances furniture, antiques, picture frames, wood trim, carvings, and turned woodwork. With its mild odor, it is also suitable for the inside of cabinets and drawers. Other applications include surfaces finished with chalk paint, wooden toys, cutting boards, wooden cooking spoons, and other wooden kitchen utensils. If the type of wood or previous treatment is unknown, first test the product on a small area. How does OLI NATURA® Furniture Wax affect wood? Unlike wood oil, which penetrates the wood and protects it from within, furniture wax works close to the surface and changes the natural color tone less. The grain and structure remain visible, while polishing gives the surface a subtle sheen. Regular rewaxing helps develop an even, distinctive patina. How is OLI NATURA® Furniture Wax applied? Apply the wax to clean, dry wood. If the consistency is too firm, the closed container can be gently warmed on a lukewarm radiator. Using a soft cotton cloth, spread sparingly, thinly, and evenly in circular motions. Allow to dry until the surface is dry to the touch. Then polish with a fresh cotton cloth or white polishing pad. The more intensively it is polished, the silkier the sheen. On raw or highly absorbent wood, a second thin coat may be advisable after drying. Tip: A clean, lint-free, discarded cotton jersey shirt is also ideal for polishing. What makes the formulation of OLI NATURA® Furniture Wax special? Purified beeswax cares for the wood surface, while hard carnauba wax gives the fine wax film strength. The formulation contains no added colorants or fragrances and is free from terpenes - including terpene-containing citrus oils such as orange peel oil -, silicones, and VOCs. Cloths soaked with the wood wax are not prone to spontaneous combustion.

OLI NATURA® hardwax oil for almost all indoor wood surfaces Oil impregnates. Wax protects. OLI NATURA® hardwax oil is the ECARF-certified oil-wax combination for almost any indoor woodworking project. The oil impregnates the wood from within, while the wax provides additional surface protection. Customers appreciate its easy application, economical coverage, fast drying and the silky feel of the treated surface. Which types of wood and applications is OLI NATURA® hardwax oil suitable for? OLI NATURA® hardwax oil is the right choice if you are looking for a hardwax oil that can be used for almost any indoor woodworking project - instead of having a different wood oil in the cupboard for every application. Whether furniture, dining table, kitchen worktop, staircase, door, wall cladding or windowsill - the oil-wax combination is suitable for almost all types of wood and wood-based materials, including maple, beech, oak, ash, spruce and pine, as well as cork, bamboo, OSB, plywood and multiplex. The hardwax oil is particularly suitable when light woods should be subtly tinted and you want an easy-to-apply, open-pore and easy-to-repair surface. Would you like a transparent coloured look? Then choose OLI NATURA® COLOUR hardwax oil - also available in Cotton White for the popular Scandi look. Do you prefer the more intense enhancement of the wood grain provided by a classic impregnating oil? Then OLI NATURA® Project Oil is the right choice. How does OLI NATURA® hardwax oil change the appearance and feel of the wood? The natural appearance of the wood is retained. The grain and structure are gently accentuated, while the surface remains open-pore and tactile. The subtle enhancement of the wood grain particularly brings light-coloured wood types into harmony. The result is a satin-matt finish. For an even more matt appearance, the surface can be polished with a white oil pad during the wet phase.Tip: Test the hardwax oil beforehand on wood prepared in the same way and assess the colour after drying. How easy is OLI NATURA® hardwax oil to apply? The oil-wax combination can be applied easily and evenly. One coat is usually sufficient for furniture. A second coat is recommended for stairs and heavily used worktops - without intermediate sanding. The surface is durable, dirt- and water-repellent, and easy to maintain. Scratches and signs of wear can be repaired locally or simply refreshed at any time - without sanding. The oil does not crack, flake or peel. What can you rely on with OLI NATURA® hardwax oil? Once fully cured, the surface is safe for people, animals and plants. Tested for everyday use: ECARF-certified (allergy-friendly), tested for food contact (LFGB), suitable for children's toys and approved by building authorities.

Wood can have colour - and still remain wood. Three functions. One product. OLI-NATURA® COLOUR hardwax oil is a pigmented oil-wax combination. Plant-based oils impregnate the wood from within, carnauba wax provides additional surface protection, and lightfast colour pigments create a natural, transparent colour effect. Colour and protection in one application. Open-pore, robust and without a lacquer character - for natural wood surfaces indoors. Which types of wood and applications is OLI-NATURA® COLOUR hardwax oil suitable for? OLI-NATURA® COLOUR hardwax oil is the right choice when the colour of the wood is to be changed and protected at the same time - without prior staining and subsequent separate final treatment. This saves an additional application step. Whether furniture, dining tables, kitchen worktops, stairs, doors, wall panelling or windowsills - the pigmented hardwax oil is suitable for almost all types of wood and wood-based materials indoors, including solid wood, glued laminated timber, veneer, plywood, multiplex, OSB, bamboo and cork. Do light woods need to remain as light as possible? Cotton White reduces the natural intensifying effect and yellowish tinge - ideal for a light Scandinavian look. Light White also visibly lightens the wood. For colourless protection, OLI-NATURA® hardwax oil Natural is the right choice. What does wood look like after applying OLI-NATURA® COLOUR hardwax oil? The natural wood appearance is retained. The grain and structure remain visible and tactile - only the colour changes. The final colour effect results from the interaction between the wood and the oil. The type of wood, its natural colour and the sanding determine how the same colour will look later. A sample surface on the original wood therefore shows the colour most reliably. All colours are also available as samplers. Cotton White reduces the natural intensifying effect and yellowish tinge on light woods. Light White also visibly lightens the wood. Dark colours appear more intense on light woods, while light colours appear correspondingly more subtle on dark woods. All colours can be mixed with one another and individually softened with OLI-NATURA® hardwax oil Natural. A second application intensifies the colour effect; with OLI-NATURA® hardwax oil Natural, it is retained. Lightfast colour pigments slow down the natural colour change of the wood caused by UV light and help maintain the colour effect for as long as possible. How easy is OLI-NATURA® COLOUR hardwax oil to apply? It is easy to apply evenly. One application is usually sufficient for furniture. A second application is recommended for stairs and heavily used worktops - without intermediate sanding. Hardwax oil is not lacquer. Apply thinly - that is sufficient. The surface is hard-wearing, dirt- and water-repellent, and easy to maintain. Scratches and signs of use can be repaired locally or simply refreshed at any time - without sanding. The oil does not crack, peel or flake. If the colour is to be retained, the second application should be made with OLI-NATURA® hardwax oil Natural. What can you rely on with OLI-NATURA® COLOUR hardwax oil? Once fully cured, the surface is harmless to people, animals and plants. It remains open-pore and breathable, supporting a pleasant indoor climate. Suitable for children's toys. For kitchen worktops, OLI-NATURA® hardwax oil Natural is recommended as the final coat.

OLI NATURA® HS Professional Oil - one application. Plenty of time to work. Parquet, stairs, furniture, or countertops: OLI NATURA® HS Professional Oil protects interior wood with just one application. The colorless, solvent-free high-solid oil enhances the natural wood tone and highlights the grain. Depending on the type of wood, sanding, and absorbency, one liter covers approximately 25-50 m². Up to 90 minutes of open time give you more control during application and make it easier to work without visible overlaps, even on large surfaces - by hand or mechanically. This leaves enough time for reworking and subsequent polishing. Apply the oil directly without hardener, or increase resistance and accelerate curing with OLI NATURA® Hardener. A ratio of 10 parts oil to 1 part hardener is sufficient. Which types of wood and applications is OLI NATURA® HS Professional Oil suitable for? For untreated or freshly sanded wood surfaces and absorbent wood-based materials indoors. On wooden floors and stairs, slip resistance is also important: R10 tested on sanded oak - both without and with hardener. Also suitable for bathroom furniture and wood surfaces with epoxy resin. Here, we recommend OLI NATURA® Hardener for greater resistance. Proven on roller coating machines: Used for years for factory-applied oil treatment of parquet and absorbent wood-based materials. How does OLI NATURA® HS Professional Oil change the appearance and feel of the wood? NATUR is unpigmented and intensifies the wood's natural tone: The wood tone gains depth and the grain becomes more pronounced. The surface remains matte, with the wood structure perceptible to the touch. Light-colored woods may appear darker and warmer. For smoked effects on oak, combine HS Professional Oil with the VOC-free reactive stain OLI NATURA® ANTIQUE in the colors Smoked and Black Smoked. The subsequent oil treatment intensifies the color effect and protects the surface. For colored surfaces, choose OLI NATURA® HS Professional Oil COLOUR.  Tip: Test on wood prepared in the same way and assess the result after drying. How easy is OLI NATURA® HS Professional Oil to apply? Apply thinly. Work in. Polish. The long open time gives you the flexibility to work the oil in carefully and evenly, even across larger sections of flooring - for a seamless result with less time pressure. Work by hand or mechanically, with or without OLI NATURA® Hardener - according to the surface and its level of use All work steps, mixing ratios, and drying times can be found in the Application tab.

OLI NATURA® Colour HS Professional Oil - Color and protection. With one coat. Parquet, wooden floorboards, stairs, tables, or other furniture: OLI NATURA® Colour HS Professional Oil colors and protects interior wood with just one coat. This high-solids color oil tints the wood transparently while keeping the grain visible. Depending on the type of wood, sanding, and absorbency, one liter covers approximately 25-50 m². Up to 60 minutes of open time give you room to work the oil in carefully and make it easier to achieve an even, seamless result, even on large surfaces. The oil can be applied directly without hardener. OLI NATURA® Hardener improves pigment binding, accelerates curing, and increases resistance. A ratio of 10 parts oil to 1 part hardener is sufficient. Which types of wood and applications is OLI NATURA® Colour HS Professional Oil suitable for? For untreated or freshly sanded wood surfaces and absorbent wood-based materials indoors. Slip resistance is also important on wooden floors and stairs: R10/R11 tested on sanded oak - without and with hardener. The achieved class depends on the specific tested system. Proven on roller coating machines: Used for many years for factory-applied oil treatment of parquet and absorbent wood-based materials. Which color suits your wood? Twelve transparent colors - from subtle to distinctive. Warm brown and natural tones give the wood a welcoming look. Chocolate Brown adds darker depth, Terra Brown an earthy warmth. Beige Grey combines warm wood nuances with a subtle gray tint. Light Ivory adds a light, warm accent for Scandinavian-inspired floors and furniture. You can mix all twelve colors with one another to create individual shades. Try it first, then decide: Use the sample set to test your preferred color on the original wood. The type of wood, its natural color, and the sanding affect the result. Assess the color effect after complete drying. How easy is OLI NATURA® Colour HS Professional Oil to apply? Apply thinly. Work in. Polish. The long open time gives you room to work the oil in carefully and evenly, even across larger floor sections - for a seamless result with less time pressure. You can work by hand or machine, with or without OLI NATURA® Hardener - according to the surface and its level of wear.All application steps, mixing instructions, and drying times can be found in the Application tab.  

The OLI NATURA® Hardener is the B component for selected OLI NATURA® oils. The additional cross-linking supports curing, accelerates drying and increases the chemical resistance of the treated surface. For approved coloured oils, it supports pigment incorporation. For floors, stairs, furniture and worktops according to the application area of the respective oil. Mix the hardener thoroughly with the oil in the prescribed ratio shortly before application. Mixing ratios by volume - oil : hardener 5:1 - Worktop-Oil and Colour-Oil Midnight-Black 0.5 litres of oil + 100 ml hardener 2.5 litres of oil + 500 ml hardener 10:1 - HS Professional Oil clear and Colour HS Professional Oil 1 litre of oil + 100 ml hardener 2.5 litres of oil + 250 ml hardener Only mix the amount required. Pot life: 2-3 hours for clear oils and a maximum of 2 hours for coloured oils. Do not continue processing after this time.

OLI-NATURA Worktop-Oil BLACKLABEL Worktop oil for wood and wood-epoxy surfaces From the Blacklabel Edition. Developed with Jungo Design - for worktops, tables, bathroom furniture, and modern wood and wood-epoxy surfaces. Worktop-Oil protects and saturates wood in just one coat. The 100% high-solid formulation based on linseed oil and tung oil provides maximum wood saturation, intense enhancement, and a durable, water-repellent surface. Highly transparent - for a natural wood look without a hazy effect. The pigment-free oil intensifies the natural color of the wood, highlights the grain and structure, and provides a matte, tactile finish with excellent everyday durability. Ideal for tabletops, worktops, solid wood furniture, bathroom furniture, and river tables. For wood-epoxy surfaces, fine sanding finishes, or applications subject to increased moisture exposure, OLI-NATURA Hardener (5:1) can optionally be used.Tip for professionals: For maximum durability, OLI-NATURA Worktop-Oil 2C is available as a preconfigured 2K set (500 ml oil + 100 ml Hardener) in the distinctive BLACKLABEL round tin.

OLI-NATURA Worktop-Oil 2C BLACKLABEL 2K worktop oil for wood and wood-epoxy surfaces From the Blacklabel Edition. Developed with Jungo Design - for river tables, epoxy resin tables, wood-epoxy worktops, and other high-quality wood and wood-epoxy projects. The preconfigured 2K system consisting of 500 ml Worktop-Oil and 100 ml Hardener combines the requirements of wood and epoxy resin in one seamless surface concept. The 100% high-solid formulation based on linseed oil and tung oil ensures maximum wood saturation, enhances the grain, and creates a durable, water-repellent surface. The chemically cross-linking oil-hardener system increases resistance, particularly under moisture exposure and the fine sanding commonly used in wood-epoxy applications. Highly transparent - for a natural wood appearance without a cloudy effect. The pigment-free system can be applied across the entire wood and epoxy resin surface. After polishing the resin areas, it creates a visually and tactilely homogeneous surface without distracting transitions between wood and epoxy resin. Ideal for river tables, epoxy resin tables, wood-epoxy worktops, designer furniture with resin inlays, and high-quality custom and one-off pieces. Result: A matte, tactile finish with natural depth, high transparency, and excellent everyday durability.

OLI-NATURA Colour-Oil 2C – Midnight Black | Black Wood Oil From the Blacklabel Edition. For deep-black wood surfaces.  Colour-Oil 2C Midnight Black colors and protects wood in just one coat.The high-solids formulation with an especially high solids content creates intense black tones and a durable surface - ideal for furniture, stairs, and high-quality indoor wood surfaces. UV-stable pigments create even, long-lasting black tones.The natural oil base made from linseed and tung oil penetrates deep into the wood and emphasizes its natural grain. Two components. One powerful result. Colour-Oil + Hardener in a 5 : 1 ratio create an especially durable surface. Especially impressive on oak For maximum depth of color, oak can optionally be pretreated with OLI-NATURA ANTIQUE.The VOC-free reactive stain reacts with the natural tannins in the wood to create authentic smoked or smoke effects. Recommended: ANTIQUE Smoked Black. Result: Deep-black wood surfaces with exceptional color depth - especially on oak.

OLI NATURA® Scandic-Oil FOR FURNITURE – raw wood effect oil for naturally light-colored furniture and stairs    Inspired by Scandinavian interior design, OLI NATURA® Scandic-Oil FOR FURNITURE preserves the natural appearance of light-colored woods. The surface looks untreated and resembles freshly sanded wood in both appearance and feel. Even on deeply brushed and textured oak, the pores are barely emphasized with a whitish effect. This creates a calm, natural raw wood look without a limed effect. Which woods and applications is OLI NATURA® Scandic-Oil FOR FURNITURE suitable for? Whether for a dining table, stair tread or favorite piece of furniture: The water-based raw wood effect oil is suitable for solid wood furniture, tabletops, stair treads, wall panels and trim in residential interiors. It is suitable for light-colored woods such as maple, oak, ash, spruce and fir. The wood should be untreated or completely sanded down. For wooden floors, use OLI NATURA® Scandic-Oil CLASSIC. How does OLI NATURA® Scandic-Oil FOR FURNITURE change the appearance and feel of the wood? Do you like wood just the way it is? Scandic-Oil only slightly intensifies the natural wood tone and gives the surface an untreated appearance. The wood structure remains perceptible to the touch. With OLI NATURA® Refresher, you can refresh the oiled surface as needed. Tip: Test the oil with a 20-ml sampler on a leftover piece of your wood. Sand it in the same way as the final surface and assess the result only after it has dried completely. Would you like to emphasize the natural wood tone more strongly? OLI NATURA® hardwax oil gives the wood a richer color and highlights the grain. How easy is OLI NATURA® Scandic-Oil FOR FURNITURE to apply? Apply two coats and finish in one day: Apply Scandic-Oil with a brush, foam roller or by spraying to freshly sanded, absorbent wood. You can apply a second coat after approximately two hours. One liter covers approximately 8–12.5 m² with two coats, depending on the type of wood, sanding and absorbency. You can find out how to carry out intermediate sanding and polishing in the Application tab. When is OLI NATURA® Scandic-Oil FOR FURNITURE with hardener recommended? Use Scandic-Oil with OLI NATURA® H2O-Hardener on tabletops and wherever grease splashes are likely. We also recommend adding hardener for stair treads. Mix ten parts oil with one part hardener. The hardener supports curing and can make the surface more resistant to water, grease and other everyday stresses. What other features distinguish OLI NATURA® Scandic-Oil FOR FURNITURE? Customers appreciate its easy application, fast drying and pleasant smell. Scandic-Oil is VOC-free, emissions-tested and baubook-declared – for a conscious choice of materials in ecological construction. Oil-soaked pads and cloths are not prone to spontaneous combustion.

OLI NATURA® Scandic-Oil CLASSIC - raw wood effect oil for naturally light parquet and plank floors Inspired by Scandinavian interior design, OLI NATURA® Scandic-Oil CLASSIC preserves the natural appearance of light wood floors. The surface looks untreated and resembles freshly sanded wood in appearance and feel. Even on deeply brushed and structured oak, the pores are barely highlighted in white. This creates a calm, natural raw wood look without a limed effect. Which types of wood and applications is OLI NATURA® Scandic-Oil CLASSIC suitable for? Whether parquet in the living room or plank flooring in the bedroom: The water-based raw wood effect oil is suitable for solid wood parquet and plank floors indoors. It is suitable for light woods such as oak, ash, birch, Douglas fir, spruce, silver fir and pine. The wood must be clean and absorbent; remove film-forming old coatings completely. For furniture and stairs, choose OLI NATURA® Scandic-Oil FOR FURNITURE. How does OLI NATURA® Scandic-Oil CLASSIC change the appearance and feel of the wood? Do you like wood just the way it is? Scandic-Oil only slightly enhances the natural wood tone and largely preserves its original colour. The surface remains open-pore and the wood structure can be felt when touched. With OLI NATURA® Refresher, you can freshen up the oiled floor as needed. Would you like to emphasize the wood tone more strongly? OLI NATURA® hardwax oil gives the wood a richer colour and highlights the grain. How easy is OLI NATURA® Scandic-Oil CLASSIC to apply? Apply Scandic-Oil twice to the freshly sanded, absorbent wood using a short-pile oil/wax roller. After approximately two to three hours, you can apply the second coat - both steps can be completed in one day. One litre is sufficient for approximately 6–8.5 m² with two coats, depending on the type of wood, sanding and absorbency. You can find all the steps in the Application tab. When is OLI NATURA® Scandic-Oil CLASSIC with hardener recommended? For floors subject to heavier wear, apply Scandic-Oil with OLI NATURA® H2O-Hardener. Mix ten parts oil with one part hardener. The additional cross-linking supports curing and can increase resistance to everyday wear. What else distinguishes OLI NATURA® Scandic-Oil CLASSIC? Scandic-Oil is VOC-free, low-odour, emissions-tested and baubook-declared - for a conscious choice of materials in ecological construction. The pigmentation is UV-stable. Oil-soaked pads and cloths are not prone to spontaneous combustion.

The OLI NATURA® H2O-Hardener is the B component for OLI NATURA® Scandic-Oil Classic and Scandic-Oil For Furniture. The additional cross-linking supports full curing and can accelerate curing as well as increase the chemical resistance of the treated surface. The areas of application depend on the respective Scandic-Oil. Shortly before application, thoroughly mix the hardener with the oil in the specified ratio. Mixing ratio by volume - oil : hardener 10:1 - Scandic-Oil Classic and Scandic-Oil For Furniture 1 liter of oil + 100 ml of hardener 2.5 liters of oil + 250 ml of hardener 5 liters of oil + 500 ml of hardener Only mix the required quantity and use immediately. Follow the information in the technical data sheet for the respective Scandic-Oil. Pot life: 2-3 hours. Do not use after this period.

OLI NATURA® Project Oil - deep-penetrating impregnating oil for easy oiling Would you like to oil wood without having to spend a long time polishing every edge? OLI NATURA® Project Oil penetrates deeply into the wood on its own and beautifully showcases its color and grain. This natural oil-based impregnating oil is also easy to apply to bevels and hard-to-reach areas. This is a noticeable advantage, especially for furniture with many details and serial furniture production. Which types of wood and applications is OLI NATURA® Project Oil suitable for? Project Oil is suitable for almost all types of wood and many wood-based materials indoors. It can be used for doors, wall paneling, and stairs, as well as for furniture with many details - such as chairs with slats, tables with profiled aprons, or cabinets with raised-panel fronts. How does OLI NATURA® Project Oil change the appearance and feel of the wood? OLI NATURA® Project Oil significantly enhances the natural color of the wood and highlights the grain. As a result, light-colored woods can take on a warm, honey-colored tone. The oiled surface has a matte appearance; the wood structure remains perceptible to the touch. Tip: Test the oil in an inconspicuous area and assess the result after drying. Would you like to change the natural wood color less? OLI NATURA® hardwax oil enhances the wood more subtly. How easy is OLI NATURA® Project Oil to apply? OLI NATURA® Project Oil is easy to apply with a brush or roller; small parts can also be treated with a cloth. Two coats are generally required on untreated wood; for lightly used shelves and small items, one coat may be sufficient. One liter covers approximately 20-25 m² per coat - depending on the type of wood, sanding, and absorbency. You can find all the application steps in the Application tab. What do customers say about OLI NATURA® Project Oil? Customers particularly appreciate OLI NATURA® Project Oil for its easy application and high coverage. Many report that the wood oil penetrates quickly and dries rapidly. They are also impressed by its very good value for money.

TEAK OIL & DECKING OIL FOR OUTDOOR WOOD Sun and rain change wood. Even weather-resistant woods such as teak fade and turn gray over time. Regular oiling with OLI NATURA® Yacht & Teak Oil counteracts the silvery-gray patina and helps protect the wood surface from drying out and becoming brittle. The oil penetrates deep into the wood and protects it from within. The surface remains open-pore and water-repellent, while the color and grain are visibly refreshed - without a closed film layer. Which types of wood and applications is OLI NATURA® Yacht & Teak Oil suitable for? For wood terraces, decking boards, garden furniture, pool surrounds and yacht decks made of suitable outdoor woods such as teak, bangkirai, Douglas fir, larch, eucalyptus, black locust, oak, Ipé or cumaru. The right choice when you want to preserve and visibly emphasize the warm character of the wood and are looking for a biocide-free wood oil for outdoor use. A particular advantage is the easy maintenance: The oil penetrates the wood and remains open-pore. The oil coating does not crack, peel or flake. Previously oiled surfaces can therefore usually be recoated easily without sanding. What does wood look like after applying OLI NATURA® Yacht & Teak Oil? Oiling gives the wood greater depth and warmth. The color and grain appear more vivid, while the surface remains open-pore and natural to the touch. Natural contains no pigments, but it is not visually colorless: Like any color-enhancing oil, it deepens the existing wood tone. Teak is lightly pigmented, subtly enhances warm wood tones and provides increased UV protection. The Teak color is also suitable for other types of wood without covering them in a teak tone. The type of wood, its natural color and sanding affect the color tone. A sample area on the original wood provides the most reliable indication. All color tones are available as samplers. How easy is OLI NATURA® Yacht & Teak Oil to apply? Apply thinly, allow to penetrate, remove excess. Apply the oil evenly in the direction of the grain and polish completely after about 15 minutes. Apply only to clean, dry wood. Then protect the freshly oiled surface from rain and moisture for 5–8 days. Very dry or highly absorbent wood can be oiled a second time after drying overnight. Treat dense woods such as teak only thinly. One coat is usually sufficient for refreshing the surface. Previously oiled surfaces can generally be maintained without sanding. Depending on weather and use, refreshing once a year is usually sufficient; for fully exposed wood, twice a year if needed. What can you rely on with OLI NATURA® Yacht & Teak Oil? Proven over many years. We have been manufacturing OLI NATURA® Yacht & Teak Oil with virtually no changes for over 20 years. We deliberately formulate it without biocides or preservatives. This makes the wood oil suitable not only for outdoor use, but also for suitable wood surfaces indoors.

CARING FOR AND RE-OILING WOODEN GARDEN FURNITURE Sun, rain and use leave their mark on wooden garden furniture over time. The color and grain fade, and the surface may feel dry and rough. OLI NATURA® Care Set No. 5 contains everything you need to refresh and re-oil oiled garden furniture - compactly assembled and coordinated with one another. What is included in the OLI NATURA® Care Set No. 5? 250 ml OLI NATURA® Yacht & Teak Oil in Teak - for refreshing the warm wood tone and for regular care. 2-in-1 sanding sponge - for smoothing rough areas and raised wood fibers. Brush - for applying a thin, even coat of oil. Polishing pad - for working in and polishing the oil. Oil-absorbent cloth - for safely removing excess oil. Which garden furniture is the Care Set suitable for? For garden tables, garden chairs, wooden benches, garden loungers and other outdoor furniture made of hardwood, exotic wood and suitable outdoor woods such as teak, bangkirai, eucalyptus or black locust. Ideal for refreshing previously oiled wood - usually without completely sanding it down. How easy is it to use? Clean the wood and allow it to dry completely. Smooth rough areas with the sanding sponge if necessary. Apply the oil thinly, allow it to penetrate for about 15 minutes and remove all excess oil. Then polish with the polishing pad. Everything you need for easy maintenance - from smoothing to the finished oil application.

This gentle yet powerful cleaning concentrate is ideal for all outdoor wood surfaces - from garden furniture to decking, whether made of untreated or oiled wood.It reliably removes green deposits, dirt and light signs of weathering, prevents them from quickly re-forming and optimally prepares the wood for subsequent oil treatment. Our 1-litre concentrate is highly economical and is mixed with water in a ratio of 1:3 or 1:4 - but can also be applied undiluted if required. Sustainably packaged: The bottle body is made of 100% recycled plastic (rPET) and is fully recyclable. The childproof push-and-turn cap ensures safe use.

OLI NATURA® PreOilCleaner - Wood pretreatment before oiling OLI NATURA® PreOilCleaner is a cleaning pretreatment for untreated or freshly sanded wood surfaces. It thoroughly cleans the wood and prepares furniture, stairs, parquet flooring, and panels for the subsequent oil finish. The product is suitable for all types of wood. Better oil absorption and more intense coloration The pretreatment increases the wood's absorbency, improves oil absorption, and intensifies the coloration of colour oils. On tannin-rich woods such as oak, OLI NATURA® PreOilCleaner reduces tannin-related reactions and thus the risk of discoloration, tannin stains, and water marks. Application at a glance Dilute at a ratio of 1:4 with lukewarm water, apply evenly until the surface is damp but not wet, and allow to dry completely. If necessary, lightly sand between coats, remove dust, and then apply oil. Step-by-step instructions can be found in the “Application” tab. Important note: This product is NOT suitable for regular, daily cleaning. When using the reactive stain OLI NATURA® Antique, the surface must NOT be treated with OLI NATURA® PreOilCleaner beforehand.

Reactive pre-stain for oak woodVOC-free water-based reactive stain for tannin-rich woods such as oak. The pretreatment reacts with natural tannins and creates authentic fuming and graying effects - more eco-friendly and significantly easier to process than traditional ammonia fuming.Depending on the selected shade - Lye-Washed, Fumed, or Black Fumed - different aging effects are created, ranging from light fumed tones to deep black effects. The shades can be mixed with one another.In combination with OLI-NATURA oils, particularly deep and vibrant surface appearances are achieved.Suitable for both artisanal and industrial application (rolling, brushing, spraying, roller-coater). Subsequent treatment with oil or wax is required.Pre-wetting (water popping) should be avoided, as this affects the reaction in the wood.

The expert against tannin stains Discover our OLI-NATURA Tannin Remover, your first choice for the effective removal of unwanted dark water and reaction stains from oak and other new tannin-rich woods. Formulated with oxalic acid, our Tannin Remover reliably neutralizes stubborn discolorations caused by the reaction of tannins with moisture and metals. Suitable for a wide range of wood surfaces - whether untreated, soaped, oiled or waxed - our product offers a versatile solution for indoor and outdoor use. The simple dosing and effective application make OLI-NATURA Tannin Remover an indispensable aid in the fight against tannin stains, preserving and restoring the natural beauty of your wood. Available in practical 50 ml dosing containers with nozzle, our Tannin Remover offers simple and safe dosing, precisely suited to your needs - finally, an alternative to large containers. The dosing nozzle enables precise application, while the black screw cap ensures safe storage.

OLI NATURA® Oil Thinner for Thinning, Refreshing and Cleaning OLI NATURA® Oil Thinner is a low-odour thinner based on isoparaffinic hydrocarbons. It adjusts the flow properties of OLI NATURA® oils and waxes and makes thickened, not yet cured oils workable again. With OLI NATURA® hardwax oil Natural, it extends the working time, making application on larger surfaces easier.Colour HS Professional Oil can be mixed with it to create a coloured maintenance oil for refreshing coloured oiled surfaces. After oiling, the thinner is also suitable for cleaning brushes, rollers and other work tools. It is not suitable for the water-based OLI NATURA® SCANDIC OIL and does not remove heavily dried or cured oil.

Good brushes deserve care A good brush can accompany you through many coats. The prerequisite is that oil, wax and paint residues are thoroughly removed from the bristles after use. The OLI NATURA® brush cleaner is used to clean brushes, paint rollers and other painting, lacquering and artists' tools. It removes residues of wood oils, waxes, paints and lacquers, as well as grease, soot, tar and bitumen. It is also suitable for brushes with natural hair and Chinese bristles. The formula contains water, coconut fatty acid, cellulose and orange oil from Citrus sinensis. Fresh residues can be treated by soaking and thoroughly kneading the bristles. Dried-on residues can be softened by soaking the brushes overnight. How completely the residues dissolve depends on the coating and its degree of curing. It is best to clean your brushes immediately after oiling or lacquering. This prevents the residues from drying in the first place.

FOR REGULAR CLEANING OF OILED WOODEN SURFACES Footprints, food stains, adhering dirt - oiled wood has to withstand quite a lot in everyday use. Usually, a dry cloth or clear water is sufficient. Where dirt can no longer be removed this way, OLI NATURA® wood soap comes into play. It cleans and cares for the surface in a single step, removes everyday dirt and also has a replenishing effect. This preserves the natural character of the wood - it can be used undiluted or diluted in a variety of ways. Which wooden surfaces is OLI NATURA® wood soap suitable for? For oiled, waxed, soaped or lye-treated wood indoors - from parquet and floorboards to stairs, furniture and other wooden surfaces that can be wiped with a damp cloth. Suitable for private and commercial use. When does wood need more than OLI NATURA® wood soap? Wood soap handles regular cleaning and maintenance care. For heavy, old, ingrained or deep-seated dirt, basic or intensive cleaning is the better choice - especially before re-oiling. If the surface appears dry, dull or visibly worn, maintenance oil for oiled wood is recommended. Does OLI NATURA® wood soap change the appearance of the wood? Wood soap cleans without leaching the surface or leaving a grey haze. This leaves the wood looking clean, fresh and naturally cared for after cleaning. How easy is OLI NATURA® wood soap to use? For regular cleaning, add 5–10 ml of wood soap per litre of lukewarm water and wipe with a damp cloth - using a cloth or white pad on small areas, and a floor wiper or flat mop on floors. For more stubborn dirt, apply undiluted to the affected area. The pH-neutral formula is gentle on skin and wood. What else makes OLI NATURA® wood soap special? The concentrated formula is highly economical, solvent-free and pleasantly fresh-scented. The bottle is made of 100% recycled plastic and is fully recyclable. A push-and-turn closure ensures child-safe handling.

OLI NATURA® Refresher - refreshes oiled wood with a neutral appearance Water-based, VOC-free maintenance oil for the initial care and refreshing of oiled wood surfaces. Preserves the existing color character without significantly deepening it. Particularly suitable for light, white and colored oiled surfaces, as well as surfaces treated with OLI NATURA® Scandic-Oil in a raw wood look. When do oiled parquet floors, stairs and furniture need care? Refresh with Refresher when water repellency decreases or the wood looks dry and dull. For oxidatively oiled parquet and plank floors, stairs and furniture indoors. For initial care, follow the application instructions for the oil used. Which maintenance oil matches the desired wood look? The pigment-free Refresher provides neutral-looking care. If you want the existing wood color and grain to stand out more, choose OLI NATURA® Wood Maintenance Oil. For surfaces treated with hardwax oil, OLI NATURA® Wood Care Wax is the right care product. How is oiled wood refreshed with Refresher? Clean the surface and allow it to dry completely. Shake Refresher well and apply it thinly, neat and undiluted. Treat small areas with a cotton cloth or white pad, and larger areas with a sprayer and flat mop or floor wiper. Distribute evenly, remove all excess material and allow to dry. What else distinguishes OLI NATURA® Refresher? Refresher has a mild odor and is baubook-declared. Cloths and pads soaked with Refresher are not prone to spontaneous combustion.

Well-maintained wood simply lasts longer. And because that is the case, we offer the utensils needed for cleaning and caring for naturally oiled wooden furniture in the practical Care Set No. 1. Care Set No. 1 contains: 250 ml OLI-NATURA wood soap 250 ml OLI-NATURA wood care oil 1 care flyer with step-by-step instructions and tips 1 polishing pad 1 oil-absorbing cloth 1 pair of disposable gloves (PLA biodegradable) The concentrated »OLI-NATURA wood soap« gently removes dirt without damaging the wood. The »OLI-NATURA wood care oil« provides intensive colour refreshment and deep-down care for the wood. The special POLISHING PAD is used to work the care oil into the surface, while the OIL-ABSORBING CLOTH removes excess oil and is used for final polishing. The DISPOSABLE GLOVES keep your hands clean. We have also included detailed instructions with plenty of tips. People who are conscious of conserving resources will also be pleased to know that the care oil should always be applied sparingly. This means that the 250 ml container can be used to care for and preserve a great many beautiful naturally oiled pieces of furniture. Application: For refreshing naturally oiled wooden surfaces. If in doubt, test on an inconspicuous area first. To test the effect of the wood care oil, we offer a practical sample size. Important: Cloths/pads soaked in oil can spontaneously ignite due to heat buildup. Therefore, clean them immediately after use or store them under water.

Well-maintained wood simply lasts longer. That's why we offer the utensils needed to clean and care for oiled/waxed wooden furniture in the practical Care Set No. 2. Care Set No. 2 includes: 250 ml OLI-NATURA wood soap 250 ml OLI-NATURA wood care wax 1 care flyer with step-by-step instructions and tips 1 polishing pad 1 oil-absorbing cloth 1 pair of disposable gloves (PLA - biodegradable) The concentrated »OLI-NATURA wood soap« gently removes dirt without damaging the wood. For intensive color refreshment and deep care, use the »OLI-NATURA wood care wax«. The special POLISHING PAD is used to massage in the care wax, while the OIL-ABSORBING CLOTH removes excess oil and provides the final polish. The DISPOSABLE GLOVES keep your hands clean. We have also included detailed instructions with plenty of helpful tips. People who are conscious of conserving resources will be pleased to know that the care wax should always be applied sparingly. This means that the 250 ml container is enough to care for and preserve a large number of beautiful naturally oiled pieces of furniture. Application: For refreshing oiled wooden surfaces and wooden surfaces treated with hardwax oil. If in doubt, test first in an inconspicuous area. To test the effect of the wood care wax, we offer a practical sample size. Important: Cloths/pads soaked in oil can spontaneously ignite due to heat buildup. Therefore, clean them immediately after use or store them under water.

CLEAN OILED WOOD. CARE FOR IT. MAINTAIN THE LOOK. Oiled wood surfaces stay beautiful for longer when cleaning and care are coordinated. The OLI NATURA® Care Set No. 3 contains everything you need to clean and refresh Scandic-Oil oiled, white-oiled, and naturally oiled wood surfaces. The wood soap cleans gently. The refresher cares for the surface and refreshes its appearance without altering the color. The pad and oil-absorbing cloth make application easier. One set. Two care steps. Everything included. When and for what is OLI NATURA® Care Set No. 3 the right choice? For oiled furniture and other wood surfaces that should look clean and well cared for again. The set is particularly suitable for Scandic-Oil oiled, white-oiled, and naturally oiled surfaces whose existing color character should be preserved. The wood soap removes dirt before care. The refresher then regenerates the oiled surface without unnecessarily deepening the color. What is included in the OLI NATURA® Care Set No. 3? 250 ml OLI NATURA® wood soap 250 ml OLI NATURA® Refresher 1 white polishing pad 1 oil-absorbing cloth 1 care flyer with step-by-step instructions and tips How does the care system work? Clean. Refresh. Done. First, clean the surface with OLI NATURA® wood soap. Then apply and work in OLI NATURA® Refresher with the white pad. The oil-absorbing cloth is used to remove excess product and for final care. What makes Care Set No. 3 particularly practical? All the required products and tools are already coordinated and compiled in one set. This makes the care set suitable both for regular maintenance care and for refreshing visibly dry or dull oiled surfaces. The included refresher is VOC-free, low-odor, and formulated to be visually neutral. Cloths and pads soaked with Refresher also do not tend to self-ignite.

Wellness for wood: This naturally curing maintenance oil for oiled wood surfaces has many beneficial properties: It refreshes the wood's “faded” colour, gives the surface new depth and radiance, penetrates very quickly, and replenishes the pores with fresh oil. This renews the protective effect and, consequently, the wood's resistance. It is particularly recommended for the initial care and refreshing of parquet and plank floors, stairs, and indoor wooden furniture treated with oxidatively drying impregnating oils. The natural-oil-based maintenance oil is unpigmented. Nevertheless, it enhances the wood's grain and colour. Thanks to its low viscosity, it is easy to apply: For small items of furniture, simply apply a little care product to a lint-free cotton cloth or polishing pad and wipe it over the surface to be treated. To refresh wooden stairs, apply the maintenance oil sparingly with a polishing pad, distribute it, and polish it with a cotton or oil-absorbent cloth. For caring for parquet and plank floors, the maintenance oil can also be applied evenly in a thin coat using a sprayer and, after a short penetration time, polished by hand or with a single-disc machine using a polishing pad. The wood care product contains only the ingredients necessary for its purpose. Its main component is refined linseed oil, supplemented with medical-grade isoparaffin for optimum self-penetration. WHEN TO CARE? The intervals at which the wood surface needs to be refreshed depend on the level of use. Good indications that the surface needs care are when its water resistance decreases, the depth of colour fades, and/or the surface feels dry and dull. The surface should then be re-oiled. The maintenance oil is also available in Care Set No. 1. To test the effect of the oil, we offer a practical sample size.

Wellness for wood: This naturally hardening maintenance wax combines oil and wax in one product. It is particularly recommended for initial care and refreshing parquet and plank floors, stairs and wooden furniture indoors that have been treated with our oxidatively drying hardwax oils. The oil replenishes the wood's pores with fresh oil, while the wax creates a fine surface film. This renews the protective effect and therefore also the resistance. The maintenance wax is not pigmented. Nevertheless, it subtly enhances the depth of color again. Thanks to its low viscosity, it is easy to apply: For small pieces of furniture, simply apply a little maintenance product to a lint-free cotton cloth or polishing pad and wipe it over the surface to be treated. To refresh wooden stairs, apply the maintenance wax sparingly with a polishing pad, spread it and polish it with a cotton or oil-absorbent cloth. For the care of parquet and plank floors, the maintenance wax can also be applied evenly in a thin layer using a sprayer and, after a short contact time, polished by hand or with a single-disc machine using a polishing pad. The wood care product contains only the ingredients necessary for its purpose. In this maintenance wax, refined linseed oil and carnauba wax form the base. The medical-grade isoparaffin ensures good self-penetration, which is why it is so easy to apply. When should you maintain the surface? The intervals at which the wood surface needs to be refreshed depend on the level of use. Good indicators that the surface needs maintenance are when water resistance and/or color depth decreases and/or the surface feels dry and dull. The surface should then be re-oiled. The maintenance oil is also available in the Maintenance Set No. 2. To test the effect of the oil, we offer a practical sample size.