Pretreatment/Stain lacquer

These water-based wood stains in six colors are ready to use and can optionally be mixed together to create a wide range of shades. They are perfect for adding color to raw or stripped softwood and hardwood surfaces, ideal for a broad range of interior wood projects - from children's furniture and toys to stairs, doors, and paneling. Thanks to its clear staining effect, our wood stain highlights the natural beauty of the wood without concealing its texture. Application is simple: After wetting the wood and intermediate sanding, apply the stain with a brush or sponge, remove excess material, and allow it to dry. The treated surface can then be oiled, waxed, or lacquered as desired to achieve the desired finish. To prevent possible bleeding when overcoating with water-based lacquers, we recommend optionally mixing the stain with OLI-AQUA Hardener 13.2 in a ratio of 10:1. The easy application of our wood stain enables both professionals and DIY enthusiasts to achieve excellent results.

Reactive pre-stain for oak woodVOC-free water-based reactive stain for tannin-rich woods such as oak. The pretreatment reacts with natural tannins and creates authentic fuming and graying effects - more eco-friendly and significantly easier to process than traditional ammonia fuming.Depending on the selected shade - Lye-Washed, Fumed, or Black Fumed - different aging effects are created, ranging from light fumed tones to deep black effects. The shades can be mixed with one another.In combination with OLI-NATURA oils, particularly deep and vibrant surface appearances are achieved.Suitable for both artisanal and industrial application (rolling, brushing, spraying, roller-coater). Subsequent treatment with oil or wax is required.Pre-wetting (water popping) should be avoided, as this affects the reaction in the wood.

intensive cleaner for lacquered wood floors and parquet OLI AQUA intensive cleaner 15.97 is a water-based cleaner for deep cleaning lacquered and water-resistant sealed parquet, wood and cork floors, as well as wooden stairs. It thoroughly removes stubborn dirt, heel marks, care product residues and old care films while being gentle on the material. Ideal when regular cleaning is no longer sufficient or a new care treatment is due. Also suitable for factory UV-sealed prefinished parquet in residential and commercial areas. After deep cleaning, we recommend treating the completely dry surface with OLI AQUA parquet care 15.95 Matt or Gloss. For regular cleaning, use OLI AQUA parquet cleaner 15.94.

Today as in the past, hand sanding is still often and gladly used, for example when working on smaller wooden furniture surfaces or curved workpieces and corners. 2-in-1 sanding sponge, coated on all 4 sides, reusable Grit 100 = medium = P220, fine sanding The aluminum oxide coating ensures good material removal Dimensions: 98 x 66 x 25 mm The medium-hard foam core adapts well to the surface This red 2-in-1 sanding sponge with a P220 sanding finish combines sandpaper and a sanding block in one piece. This grit is ideal for fine sanding raw wood surfaces, intermediate sanding, and resanding wet-treated surfaces. The foam core makes the sponge comfortable to hold and allows it to adapt to the surface being worked on. Slight grain shedding is normal, and the workpiece should be dusted after sanding.The sanding sponge is reusable. Clean it thoroughly after each use to remove sanding dust and other contaminants. To do this, rinse the sanding sponge under running water and, if necessary, scrub it with a soft brush or cleaning cloth. If the sanding sponge is very dirty, use a mild cleaning agent if necessary. Then allow the sanding sponge to dry completely before using it again.

For initial and intermediate sanding For cleaning sanding Leaves no scratches High-quality professional quality The Swedish red sanding pads are suitable for all disc sanders measuring 13 inches and are recommended for various tasks. They can be used for intermediate sanding or to abrade an existing seal. They can also be used for cleaning sanding of greyed, oiled wooden floors. The sanding pattern is approximately equivalent to grit 150. The standard pads are approximately 8 mm thick and have a diameter of 330mm (13''). Unlike sanding screens, the pad works more gently and leaves virtually no sanding marks. Unlike other pads, the sanding pad wears down during use. Approximately 10 - 15 m² can be treated with one side of the pad. However, this figure is only a non-binding guideline; the actual coverage depends greatly on the conditions on site. Dimensions: Ø 330 mm, ╪ 8 mmColor: Swedish redContents: 1 piece For smaller areas, we recommend our Swedish Red standard hand pads, 25 cm. For efficient use of the pads, we recommend using the large pad holder with handle or the pad holder attachment for a telescopic handle.