Raw Wood Effect Oil

RAW WOOD LOOK. ALMOST LIKE UNTREATED. Inspired by Scandinavian living styles, OLI NATURA® Scandic-Oil FOR FURNITURE preserves the natural expression of light woods. The typical darkening of the wood is reduced, its natural color is largely retained, and the surface appears almost freshly sanded. Its high light stability helps slow down darkening and yellowing – while providing reliable everyday protection. Even on deep-brushed and structured oak, pigment deposits in the pores remain almost invisible. This creates a calm, natural raw wood look without a limed effect. When is OLI NATURA® Scandic-Oil FOR FURNITURE the right choice? If you want to protect light wooden furniture or stairs, where the freshly sanded character should be preserved as much as possible. Scandic-Oil FOR FURNITURE is particularly suitable for modern raw wood surfaces where a classic oil would darken too much. For wooden floors, use OLI NATURA® Scandic-Oil CLASSIC. What is OLI NATURA® Scandic-Oil FOR FURNITURE suitable for? The raw wood effect oil is suitable for the protective treatment of solid wood surfaces in indoor living areas – from furniture and tabletops to stair treads, wall panels, and moldings. It is particularly suitable for untreated light softwoods and hardwoods such as oak, ash, spruce, or fir. For heavily used areas, 2K application with OLI NATURA® H2O-Hardener is recommended. What does wood look like after OLI NATURA® Scandic-Oil FOR FURNITURE? The natural color of the wood is largely retained. The pores are not whitened – for a natural raw surface without a limed effect, which visually and haptically resembles freshly sanded wood. The surface effect can be specifically influenced with optional additional work steps. The impregnation can be refreshed repeatedly by re-oiling with OLI NATURA® Refresher. A test area on the original wood is recommended. 20 ml samplers are available for this purpose. How easy is OLI NATURA® Scandic-Oil FOR FURNITURE to apply? The raw wood effect oil is applied in two coats to raw wood – with a brush, roller, or spray method. Since the water content can raise wood fibers, a light intermediate sanding is recommended after the first coat. By polishing the still-wet second coat with a pad, the surface becomes duller, and layer and streak formation are counteracted. For initial care or an optional third coat, OLI NATURA® Refresher can be used. When is 2K application recommended?For heavily used surfaces, Scandic-Oil FOR FURNITURE is processed with OLI NATURA® H2O-Hardener in a ratio of 10:1. The additional cross-linking increases resistance to water, grease, and common household stresses. For tabletops and surfaces with anticipated grease splashes, 2K application should always be used. What else distinguishes OLI NATURA® Scandic-Oil FOR FURNITURE? VOC-free, low-odor, and tested for indoor use. The raw wood effect oil contains no volatile organic solvents, complies with DIN EN 71-3, is saliva and perspiration resistant according to DIN 53160, DIBt-approved, and baubook-declared. Oil-soaked pads and rags are not prone to spontaneous combustion.

RAW WOOD LOOK. ALMOST LIKE UNTREATED. Inspired by Scandinavian interior design, OLI NATURA® Scandic-Oil CLASSIC preserves the natural look and feel of light wood floors. The typical darkening of the wood is significantly reduced, its natural colour largely retained, and parquet or planks appear almost freshly sanded. Light-stable white pigments also help to slow down darkening and yellowing – with reliable everyday protection. Even on deep-brushed and textured oak, pigment deposits in the pores remain almost invisible. This creates a calm, natural raw wood look without a limed effect. Natural. Raw. Protected. Almost like freshly sanded. When is OLI NATURA® Scandic-Oil CLASSIC the right choice? If you want to protect light parquet or plank floors whose freshly sanded character should be preserved as much as possible. Scandic-Oil CLASSIC is particularly suitable for modern raw wood floors where a classic parquet oil would darken the wood colour too much. For furniture and stairs, use OLI NATURA® Scandic-Oil FOR FURNITURE. For industrial roller application, Scandic-Oil MANUFAKTUM is available. What is OLI NATURA® Scandic-Oil CLASSIC suitable for? The raw wood effect oil is suitable for raw and freshly sanded solid wood parquet and plank floors in indoor living areas. It is particularly suitable for light hardwoods and softwoods such as oak, Douglas fir, white fir, birch or spruce. For floors that need to withstand more in everyday life, 2K processing with OLI NATURA® H2O-Hardener is recommended – especially in heavily used living areas. What does wood look like after OLI NATURA® Scandic-Oil CLASSIC? The natural inherent colour of the wood is largely preserved. The pores are not whitishly accentuated – for a naturally raw surface without a limed effect, which visually and haptically resembles freshly sanded wood. The wood remains open-pored and breathable. The surface can be initially treated and subsequently refreshed with OLI NATURA® Refresher. A test area on the original wood is recommended. How easy is OLI NATURA® Scandic-Oil CLASSIC to apply? CLASSIC within the Scandic-Oil family is formulated to be thinner and specially optimised for roller application on parquet and planks. The application is done in two coats. After the first coat, the dried surface is intermediate-sanded with a Swedish red sanding pad. By polishing out the still wet second coat with a white pad, the surface becomes more matte. Thanks to the fast drying time, the complete surface build-up can be carried out within one working day. For additional initial care, OLI NATURA® Refresher can then be used. When is 2K processing recommended? For heavily used floors, Scandic-Oil CLASSIC is processed with OLI NATURA® H2O-Hardener in a 10:1 ratio. The additional cross-linking increases resistance, especially to grease, water, and common household stresses. What else distinguishes OLI NATURA® Scandic-Oil CLASSIC? VOC-free, low odour, and tested for indoor use. The raw wood effect oil contains no volatile organic solvents, complies with DIN EN 71-3, is saliva and perspiration resistant according to DIN 53160, DIBt-approved, and baubook-declared. Oil-soaked pads and rags are not prone to spontaneous combustion..

MORE CROSS-LINKING. MORE DURABILITY. OLI NATURA® H2O-Hardener is the B-component or 2K hardener for OLI NATURA® Scandic-Oil CLASSIC and Scandic-Oil FOR FURNITURE. With its addition, both wood oils can optionally be processed as a powerful 2K system. The hardener supplements the normal oxidative curing of the oil with additional molecular cross-linking. This makes the surface loadable earlier, achieves a higher final hardness and gains chemical resistance. The color effect of the raw wood effect and the gloss level are hardly affected by the addition of the hardener. Add hardener. Increase durability. When is OLI NATURA® H2O-Hardener the right choice? When a wooden surface to be treated with Scandic-Oil CLASSIC or Scandic-Oil FOR FURNITURE needs to be particularly durable or cured faster. The 2K processing is particularly recommended for floors, stairs, as well as table and worktops. How is OLI NATURA® H2O-Hardener used? The hardener is added to the oil immediately before processing in a ratio of 10 parts oil : 1 part H2O-Hardener. 100 ml hardener is sufficient for 1 liter of oil, 500 ml for 5 liters of oil.Smaller quantities can also be mixed in the same proportion. The pot life is 2–3 hours. Therefore, only mix as much material as can be safely processed within this time. How quickly does Scandic-Oil cure with H2O-Hardener? By adding the B-component, curing is significantly accelerated. After a maximum of 48 hours, the surface is about 90% cured. During this time, protect the treated area from water. Temperature, humidity and air movement can influence the actual drying. What else distinguishes OLI NATURA® H2O-Hardener? The H2O-Hardener contains less than 0.1% diisocyanate monomers and is therefore not subject to training according to EU 2020/1149.