Wood can have colour - and still remain wood.
Three functions. One product. OLI-NATURA® COLOUR hardwax oil is a pigmented oil-wax combination. Plant-based oils impregnate the wood from within, carnauba wax provides additional surface protection, and lightfast colour pigments create a natural, transparent colour effect.
Colour and protection in one application. Open-pore, robust and without a lacquer character - for natural wood surfaces indoors.
Which types of wood and applications is OLI-NATURA® COLOUR hardwax oil suitable for?
OLI-NATURA® COLOUR hardwax oil is the right choice when the colour of the wood is to be changed and protected at the same time - without prior staining and subsequent separate final treatment. This saves an additional application step.
Whether furniture, dining tables, kitchen worktops, stairs, doors, wall panelling or windowsills - the pigmented hardwax oil is suitable for almost all types of wood and wood-based materials indoors, including solid wood, glued laminated timber, veneer, plywood, multiplex, OSB, bamboo and cork.
Do light woods need to remain as light as possible? Cotton White reduces the natural intensifying effect and yellowish tinge - ideal for a light Scandinavian look. Light White also visibly lightens the wood. For colourless protection, OLI-NATURA® hardwax oil Natural is the right choice.
What does wood look like after applying OLI-NATURA® COLOUR hardwax oil?
The natural wood appearance is retained. The grain and structure remain visible and tactile - only the colour changes.
The final colour effect results from the interaction between the wood and the oil. The type of wood, its natural colour and the sanding determine how the same colour will look later. A sample surface on the original wood therefore shows the colour most reliably. All colours are also available as samplers.
Cotton White reduces the natural intensifying effect and yellowish tinge on light woods. Light White also visibly lightens the wood. Dark colours appear more intense on light woods, while light colours appear correspondingly more subtle on dark woods. All colours can be mixed with one another and individually softened with OLI-NATURA® hardwax oil Natural. A second application intensifies the colour effect; with OLI-NATURA® hardwax oil Natural, it is retained.
Lightfast colour pigments slow down the natural colour change of the wood caused by UV light and help maintain the colour effect for as long as possible.
How easy is OLI-NATURA® COLOUR hardwax oil to apply?
It is easy to apply evenly. One application is usually sufficient for furniture. A second application is recommended for stairs and heavily used worktops - without intermediate sanding.
Hardwax oil is not lacquer. Apply thinly - that is sufficient. The surface is hard-wearing, dirt- and water-repellent, and easy to maintain. Scratches and signs of use can be repaired locally or simply refreshed at any time - without sanding. The oil does not crack, peel or flake. If the colour is to be retained, the second application should be made with OLI-NATURA® hardwax oil Natural.
What can you rely on with OLI-NATURA® COLOUR hardwax oil?
Once fully cured, the surface is harmless to people, animals and plants. It remains open-pore and breathable, supporting a pleasant indoor climate. Suitable for children's toys. For kitchen worktops, OLI-NATURA® hardwax oil Natural is recommended as the final coat.
PREPARATION
- Sanding: Sand the wooden surface professionally. Final sanding for furniture: Maximum grit 240.
- Wood moisture: 8–12 %
- Substrate: Firm, dry, clean, sound and free from release agents.
- Application: Bring the material and substrate to room temperature.
OPTIONAL:
- Check the colour effect in advance on the original wood using an OLI-NATURA Sampler.
- For tables made of tannin-rich wood (e.g. oak): Lightly wet the surface before oiling - ideally with a little PreOilCleaner in the water. This reduces the risk of water marks and tannin stains.
GOOD TO KNOW:
- When pre-treating with OLI-NATURA Antique Reactive Stain do not wet the surface and do not clean it with PreOilCleaner Consumption depends on the type of wood, sanding and absorbency..
- Excessive material application, low temperatures or high humidity extend the drying time.
- APPLICATION
Shake the container well or stir thoroughly.
- Apply the oil thinly and evenly with a brush, roller or oil pad until the surface is completely wetted.
Re-oil dry areas if necessary.
- Allow to penetrate for 15–20 minutes.
- After the contact time, remove all excess oil and polish the surface completely free of residue with a cotton cloth or white pad.
- For higher levels of use, apply a second thin coat without intermediate sanding after at least 24 hours.
- Coverage
1-2 coats at approx. 40-50 g/m² (approx. 20-25 m²/L).
- Coverage varies depending on the type of wood, sanding pattern and absorbency.
- Drying
Dust-dry:
- after approx. 1–2 hours Recoatable:
- after approx. hours24 Fully cured:
- 7 days 1–2 hours Protect from water, do not clean while damp and use the surface only gently until fully cured.
Cleaning & storage
Clean tools immediately after use with
- OLI-NATURA brush cleaner OLI-NATURA Oil Thinner, or mineral spirits. Can be stored for at least
- 24 months when unopened. Store in a cool, dry place protected from frost. Seal opened containers immediately and use them as soon as possible.
- ⚠ Safety
Oil-soaked cloths, pads and sanding dust can self-ignite. Store airtight after use or immerse in water.
Ölgetränkte Tücher, Pads und Schleifstaub können sich selbst entzünden. Nach Gebrauch luftdicht lagern oder in Wasser tauchen.
Care & cleaning of surfaces treated with
OLI NATURA® Colour hardwax oil
Regular cleaning and appropriate care keep your surface treated with OLI NATURA® Colour hardwax oil beautiful and durable.
Clean gently
Dust furniture dry; sweep or vacuum stairs and floors regularly. Remove sand and dirt as soon as possible, as they can cause scratches. If needed, clean with OLI NATURA® wood soap using a barely damp cloth. Follow the dosage instructions and avoid standing moisture.
Refresh as needed
If the surface feels dry or dull, or if its water-repellent effect decreases, refreshing it is recommended. To do so, apply OLI NATURA® Wood Care Wax to the clean, completely dry surface. For lightly oiled surfaces, we recommend OLI NATURA® Refresher. How often care is needed depends on the level of use. Follow the application instructions for the respective product.
Touch up damaged areas
If needed, lightly sand and remove dust from damaged areas, then apply a thin coat of OLI NATURA® Colour hardwax oil in the originally used colour . Test the colour effect first in an inconspicuous area. Remove excess material and polish. After drying, apply a thin coat of OLI NATURA® Natural hardwax oil and polish it as well.
Protect freshly oiled surfaces
For the first 5–7 days protect from moisture and do not clean or care for the surface when wet.
Labelling
OLI-NATURA hardwax oil is not subject to labelling requirements and is not classified as hazardous under Regulation (EC) No. 1272/2008 (CLP). It is neither subject to labelling requirements nor classified as dangerous goods.
Safety instructions
⚠ Cloths, rags and polishing pads soaked with oil can spontaneously ignite due to heat buildup. Clean them immediately after use, submerge them completely in water, or store them in an airtight metal container.
P102: Keep out of reach of children.
