Oils & Waxes

Boiled linseed oil is "New Old School" - an almost forgotten traditional coating that was once commonly used for wooden surfaces and building elements - both indoors and outdoors. In 2015, we rediscovered the traditional recipe, carefully developed it further, and had it tested for contact with food. Today, boiled linseed oil is one of the most original ways for many manufacturers and wood lovers to naturally protect wood: for cutting boards, end grain, kitchen wood, turned works as well as bowls, knife handles, toys, bird & bee houses, windows and doors. Our boiled linseed oil is produced in a gentle cooking process exclusively from pure, cold-pressed linseed oil. For faster and more uniform drying, we only add a minimal amount of a modern drying agent to the recipe. Further additives and solvents are taboo. Moreover: our boiled linseed oil is LFGB-tested and suitable for wooden surfaces with food contact. After application, the boiled linseed oil forms a permanent bond with the wood and creates a water-repellent layer. The application remains deliberately simple: apply generously with a cotton cloth or brush, let it soak in briefly, and wipe off excess oil. After sufficient drying, the application can be repeated several times. Usually, two to three coats are sufficient. The wood appears livelier, warmer, and richer in tone. Light woods develop a natural honey tone.

Our Care Set No. 4 offers almost everything for wooden cutting board fans: from high-quality OLI-NATURA Boiled Linseed Oil to practical pads. It is ideal for deep protection and care of kitchen boards, snack and cutting boards, kitchen countertops, and other wooden utensils. Whether as a gift or for yourself - our Care Set No. 4 is the ideal choice. 250 ml OLI-NATURA Boiled Linseed Oil, solvent-free and food-safe, is ideal for the initial or subsequent treatment of your wood. It offers deep protection, prevents drying out, and revives the color.  If the surface feels a bit rough, the 2in1 sanding sponge P220 is perfect for a fine sanding. It is washable and reusable. The two white pads are specially designed to evenly and deeply massage the oil into the wood. They can be easily cut to a smaller size if needed. The same applies to the oil absorbent cloth, with which you remove and polish off excess oil. With the disposable gloves, your hands stay clean. The care flyer provides useful information and tips and includes a QR code to the how-to video.

A Classic Reimagined: As it was 100 years ago, this colorless furniture wax is made from a blend of natural carnauba and beeswax. However, it is contemporary in its complete absence of terpenes, silicones, and VOCs. This makes "OLI-NATURA Furniture Wax" a reimagining of a true classic. The rich furniture wax nourishes and cares for the wood. It creates a velvety soft feel and a patina that deepens over time. It not only makes the surface water-repellent but also prevents dirt from penetrating the wood. The wax is applied in circular motions with a soft cloth and then polished. It is suitable for all wood types and is primarily used for furniture care or initial treatment. The wax has a pleasant, subtle scent. "OLI-NATURA Furniture Wax" is produced using traditional artisanal methods from 100% genuine beeswax and carnauba wax, along with other proven raw materials. The use of fragrances (terpenes), preservatives, formaldehydes, aromatics, and cobalt salts is deliberately avoided. The wax is VOC-free, complies with DIN EN 71-3 (Safety of Toys) and DIN 53160 (Saliva and Sweat Resistance).

OLI NATURA® Hard Wax Oil for almost all interior wood surfaces Oil impregnates. Wax protects. OLI NATURA® Hard Wax Oil is the ECARF-certified oil-wax combination for almost any interior wood project. The oil impregnates the wood from the inside, while the wax additionally protects the surface with a fine protective film. Which types of wood and applications is OLI NATURA® Hard Wax Oil suitable for?  OLI NATURA® Hard Wax Oil is the right choice if you are looking for a classic hard wax oil that can be used for almost all interior wood projects – instead of having a different wood oil in the cupboard for each application. Whether it's furniture, dining tables, kitchen worktops, stairs, doors, wall paneling or window sills – the oil-wax combination is suitable for almost all types of wood and wood-based materials, including maple, beech, oak, ash, spruce and pine, as well as cork, bamboo, OSB, plywood and multiplex. The hard wax oil is particularly suitable if light woods are only to be subtly deepened in color and you want an easy-to-apply, open-pored and repair-friendly surface. Do you want a transparent colored look? Then choose OLI NATURA® COLOUR Hard Wax Oil – also in Cotton White for the popular Scandi look. Do you prefer the stronger color deepening of a classic impregnating oil? Then OLI NATURA® Project Oil is the right choice. What does wood look like after OLI NATURA® Hard Wax Oil? The natural wood look is preserved. Grain and structure are subtly highlighted, and the surface remains open-pored and tactile. The subtle color deepening harmoniously brings out particularly light wood species. The result is a silky matte finish. For an even more matte appearance, the surface can be polished during the wet phase with a white oil pad. How easy is OLI NATURA® Hard Wax Oil to apply? The oil-wax combination can be applied easily and evenly. For furniture, one coat is usually sufficient. For stairs and heavily used worktops, a second coat is recommended – without intermediate sanding. Hard wax oil is not varnish. Apply thinly – that's enough. The surface is durable, dirt and water repellent, and easy to care for. Scratches and signs of wear can be repaired locally or simply refreshed at any time – without sanding. The oil does not crack, peel, or flake. What can you rely on with OLI NATURA® Hard Wax Oil? After complete curing, the surface is harmless to humans, animals, and plants. Tested for everyday use: ECARF-certified (allergy-friendly), food contact-tested (LFGB), suitable for children's toys, and approved by building authorities.

Wood can take on color – and still remain wood. Three functions. One product. OLI-NATURA® COLOUR Hard Wax Oil is a pigmented oil-wax combination. Vegetable oils impregnate the wood from the inside, carnauba wax additionally protects the surface, and lightfast color pigments provide a natural, transparent color effect. Color and protection in one step. Open-pored, robust, and without a lacquer-like finish – for natural wood surfaces indoors. Which woods and applications are suitable for OLI-NATURA® COLOUR Hard Wax Oil? OLI-NATURA® COLOUR Hard Wax Oil is the right choice when the color of the wood needs to be changed and protected at the same time – without prior staining and subsequent separate finishing. This saves an additional work step. Whether for furniture, dining tables, kitchen countertops, stairs, doors, wall paneling, or windowsills – the pigmented hard wax oil is suitable for almost all wood types and wood-based materials indoors, including solid wood, glulam, veneer, plywood, multiplex, OSB, bamboo, and cork. Should light woods remain as light as possible? Cotton White reduces the natural darkening effect and yellowing – ideal for a bright Scandinavian look. Light White visibly brightens even further. For colorless protection, OLI-NATURA® Hard Wax Oil Natural is the suitable choice. What does wood look like after OLI-NATURA® COLOUR Hard Wax Oil? The natural wood appearance is preserved. Grain and structure remain visible and tangible – only the color changes. The subsequent color effect results from the interplay of wood and oil. Wood type, inherent color, and sanding determine how the same color tone will appear. Therefore, a sample on the original wood provides the most reliable representation of the color. All color tones are also available as samplers. Cotton White reduces the natural darkening and yellowing on light woods. Light White visibly brightens further. Dark color tones appear stronger on light woods, while light color tones appear correspondingly more subtle on dark woods. All color tones are intermixable and can be individually softened with OLI-NATURA® Hard Wax Oil Natural. A second coat intensifies the color effect; with OLI-NATURA® Hard Wax Oil Natural, it is maintained. Lightfast color pigments slow down the natural color change of the wood due to UV light and help to preserve the color effect for as long as possible. How easy is OLI-NATURA® COLOUR Hard Wax Oil to apply? It is easy and uniform to apply. For furniture, one coat is usually sufficient. For stairs and heavily used countertops, a second coat is recommended – without intermediate sanding. Hard wax oil is not a lacquer. Apply thinly – that's enough. The surface is durable, dirt- and water-repellent, and easy to maintain. Scratches and signs of wear can be selectively repaired or simply refreshed at any time – without sanding. The oil does not crack, peel, or flake. If the color is to be maintained, the second coat should be applied with OLI-NATURA® Hard Wax Oil Natural. What can you rely on with OLI-NATURA® COLOUR Hard Wax Oil? After complete curing, the surface is safe for humans, animals, and plants. It remains open-pored and breathable, contributing to a pleasant indoor climate. Suitable for children's toys. For kitchen countertops, OLI-NATURA® Hard Wax Oil Natural is recommended as a topcoat.

Made for professionals, designed for wood. One coat of oil. Done. Thanks to High-Solid. Whether used on floor, stairs, or furniture – as long as it's wood. An oil that protects where it should: in the wood. OLI-NATURA HS Profiöl is solvent-free. What goes into the wood stays in the wood. No evaporation. That's why in most cases: 1 x oiling is enough. 100% natural oil. A plant-based oil mixture made from linseed oil and tung oil – long open time, deep penetration, breathable, velvety to the touch, matte look. Enhances the natural structure of the wood and provides a finish that feels as natural as it looks. Already excellent as 1K. Even stronger as 2K. For those who want to boost it, add the OLI-NATURA Hardener: 10:1 mix for faster curing, denser cross-linking, and extra resistance – ideal for kitchen countertops, bathroom furniture & similar high-use surfaces, especially with fine sanding (> 180 grit) or when time is of the essence. Tested? Thoroughly.OLI-NATURA HS Profiöl meets the highest requirements for environment, safety, and indoor air: DIBt-approved, low-emission (AgBB), TRGS-compliant, GISCODE Ö10+ (BG BAU), and baubook-declared. Additionally, food contact safe (LFGB), toy safe (EN 71-3), as well as saliva & sweat resistant (DIN 53160) – and slip-resistant according to EN 16165, Class R10/R11 for safe floors and stairs.

Colors and protects with just one coat of oil – now in 12 new design shades.With or without hardener – this emission-tested high-solid color oil brings current color inspirations from architecture, interior design, and craftsmanship to wooden floors, furniture, and stairs. Naturally beautiful, healthy for living, and efficient to apply. The transparent color palette with UV-resistant pigments is intermixable. The shades Signal White and Light Ivory, with their calm, Scandinavian-inspired look, are ideal for light woods such as oak, ash, maple, birch, or spruce. For those who want to creatively showcase oak, combine HS Professional Oil with the reactive stain OLI-NATURA Antique. The long open time provides plenty of scope for polishing – a real advantage, especially on larger areas. The low viscosity ensures pleasantly easy handling, while the fast curing time is impressive even without hardener. In combination with OLI-NATURA Hardener (mixing ratio 10:1), the curing time is significantly reduced, and the surface's resistance increases. The certified quality is emission-tested, DIBt-certified, and TRGS-compliant – ideal for professional indoor use. Good to know:Wood is unique – and that's what makes it exciting. The color effect depends on the wood type, texture, sanding, and processing. Our color images are for orientation only and may differ from the actual result. Therefore, it is best to test the color oil on a small area beforehand! For testing: practical sample set with 11 × 20 ml HS Professional Oil available  

OLI-NATURA Worktop-Oil BLACKLABEL Worktop Oil for Wood and Wood-Epoxy Surfaces From the Blacklabel Edition. Developed with Jungo Design – for worktops, tables, bathroom furniture, and modern wood and wood-epoxy surfaces. Worktop-Oil protects and saturates wood in just one application. The 100% high-solid formulation based on linseed oil and tung oil ensures maximum wood saturation, intense color enhancement, and a resistant, water-repellent surface. Highly transparent – for a natural wood look without streaking. The pigment-free oil enhances the natural wood color, accentuates grain and texture, and provides a matte, tactile finish with high everyday usability. Ideal for table tops, worktops, solid wood furniture, bathroom furniture, and river tables. For wood-epoxy surfaces, fine sanding, or applications with increased moisture exposure, OLI-NATURA Hardener (5:1) can optionally be used.Tip for professionals: For maximum durability, OLI-NATURA Worktop-Oil 2C is available as a pre-packaged 2K set (500 ml oil + 100 ml hardener) in the distinctive BLACKLABEL round tin.

OLI-NATURA Colour-Oil 2C – Midnight Black | Black Wood Oil From the Blacklabel Edition. For deep black wooden surfaces. Colour-Oil 2C Midnight Black stains and protects wood in just one application.The high-solid formulation with a particularly high solids content ensures intense black tones and a durable surface – ideal for furniture, stairs and high-quality wooden surfaces indoors. UV-stable pigments create uniform, long-lasting black tones.The natural oil base of linseed and tung oil penetrates deep into the wood and emphasizes the natural structure. Two components. One strong result. Colour-Oil + Hardener in a 5 : 1 ratio ensure a particularly durable surface. Particularly impressive on oak For maximum black depth, oak can optionally be pre-treated with OLI-NATURA ANTIQUE.The VOC-free reactive stain reacts with the natural tannins in the wood and creates authentic fumed or smoke effects. Recommended: ANTIQUE Smoked black. Result: Deep black wooden surfaces with exceptional color depth – especially on oak.

The OLI-NATURA Hardener is the B-component for selected 2K oils and enables significantly faster curing, higher resistance, and optimal oil anchoring. The additional molecular cross-linking creates deeply anchored, tightly meshed oil structures that make the surface particularly robust and durable. Thanks to its VOC-free formula (0% solvent), the hardener is environmentally friendly and safe to use. It improves chemical resistance and optimizes pigment absorption in colored oils. Especially with a very fine final sanding, it ensures that the oil penetrates deep into the wood fibers even at high grit levels. Processing with OLI-NATURA Hardener is particularly recommended for heavily used surfaces such as floors, stairs, and countertops, as well as for wet rooms, wood and epoxy resin work with very fine sanding – ideal wherever quick use of the surface is desired. Note: This product contains less than 0.1% diisocyanate monomers and can therefore be used without additional training. Mixing Ratios: 5:1 → Worktop-Oil, 2K Colour Oil 100 ml Hardener → 0.5 L Oil 500 ml Hardener → 2.5 L Oil 10:1 → HS Profiöl, HS Profiöl farbig 100 ml Hardener → 1 L Oil 250 ml Hardener → 2.5 L Oil 500 ml Hardener → 5 L Oil

RAW WOOD LOOK. ALMOST LIKE UNTREATED. Inspired by Scandinavian living styles, OLI NATURA® Scandic-Oil FOR FURNITURE preserves the natural expression of light woods. The typical darkening of the wood is reduced, its natural color is largely retained, and the surface appears almost freshly sanded. Its high light stability helps slow down darkening and yellowing – while providing reliable everyday protection. Even on deep-brushed and structured oak, pigment deposits in the pores remain almost invisible. This creates a calm, natural raw wood look without a limed effect. When is OLI NATURA® Scandic-Oil FOR FURNITURE the right choice? If you want to protect light wooden furniture or stairs, where the freshly sanded character should be preserved as much as possible. Scandic-Oil FOR FURNITURE is particularly suitable for modern raw wood surfaces where a classic oil would darken too much. For wooden floors, use OLI NATURA® Scandic-Oil CLASSIC. What is OLI NATURA® Scandic-Oil FOR FURNITURE suitable for? The raw wood effect oil is suitable for the protective treatment of solid wood surfaces in indoor living areas – from furniture and tabletops to stair treads, wall panels, and moldings. It is particularly suitable for untreated light softwoods and hardwoods such as oak, ash, spruce, or fir. For heavily used areas, 2K application with OLI NATURA® H2O-Hardener is recommended. What does wood look like after OLI NATURA® Scandic-Oil FOR FURNITURE? The natural color of the wood is largely retained. The pores are not whitened – for a natural raw surface without a limed effect, which visually and haptically resembles freshly sanded wood. The surface effect can be specifically influenced with optional additional work steps. The impregnation can be refreshed repeatedly by re-oiling with OLI NATURA® Refresher. A test area on the original wood is recommended. 20 ml samplers are available for this purpose. How easy is OLI NATURA® Scandic-Oil FOR FURNITURE to apply? The raw wood effect oil is applied in two coats to raw wood – with a brush, roller, or spray method. Since the water content can raise wood fibers, a light intermediate sanding is recommended after the first coat. By polishing the still-wet second coat with a pad, the surface becomes duller, and layer and streak formation are counteracted. For initial care or an optional third coat, OLI NATURA® Refresher can be used. When is 2K application recommended?For heavily used surfaces, Scandic-Oil FOR FURNITURE is processed with OLI NATURA® H2O-Hardener in a ratio of 10:1. The additional cross-linking increases resistance to water, grease, and common household stresses. For tabletops and surfaces with anticipated grease splashes, 2K application should always be used. What else distinguishes OLI NATURA® Scandic-Oil FOR FURNITURE? VOC-free, low-odor, and tested for indoor use. The raw wood effect oil contains no volatile organic solvents, complies with DIN EN 71-3, is saliva and perspiration resistant according to DIN 53160, DIBt-approved, and baubook-declared. Oil-soaked pads and rags are not prone to spontaneous combustion.

RAW WOOD LOOK. ALMOST LIKE UNTREATED. Inspired by Scandinavian interior design, OLI NATURA® Scandic-Oil CLASSIC preserves the natural look and feel of light wood floors. The typical darkening of the wood is significantly reduced, its natural colour largely retained, and parquet or planks appear almost freshly sanded. Light-stable white pigments also help to slow down darkening and yellowing – with reliable everyday protection. Even on deep-brushed and textured oak, pigment deposits in the pores remain almost invisible. This creates a calm, natural raw wood look without a limed effect. Natural. Raw. Protected. Almost like freshly sanded. When is OLI NATURA® Scandic-Oil CLASSIC the right choice? If you want to protect light parquet or plank floors whose freshly sanded character should be preserved as much as possible. Scandic-Oil CLASSIC is particularly suitable for modern raw wood floors where a classic parquet oil would darken the wood colour too much. For furniture and stairs, use OLI NATURA® Scandic-Oil FOR FURNITURE. For industrial roller application, Scandic-Oil MANUFAKTUM is available. What is OLI NATURA® Scandic-Oil CLASSIC suitable for? The raw wood effect oil is suitable for raw and freshly sanded solid wood parquet and plank floors in indoor living areas. It is particularly suitable for light hardwoods and softwoods such as oak, Douglas fir, white fir, birch or spruce. For floors that need to withstand more in everyday life, 2K processing with OLI NATURA® H2O-Hardener is recommended – especially in heavily used living areas. What does wood look like after OLI NATURA® Scandic-Oil CLASSIC? The natural inherent colour of the wood is largely preserved. The pores are not whitishly accentuated – for a naturally raw surface without a limed effect, which visually and haptically resembles freshly sanded wood. The wood remains open-pored and breathable. The surface can be initially treated and subsequently refreshed with OLI NATURA® Refresher. A test area on the original wood is recommended. How easy is OLI NATURA® Scandic-Oil CLASSIC to apply? CLASSIC within the Scandic-Oil family is formulated to be thinner and specially optimised for roller application on parquet and planks. The application is done in two coats. After the first coat, the dried surface is intermediate-sanded with a Swedish red sanding pad. By polishing out the still wet second coat with a white pad, the surface becomes more matte. Thanks to the fast drying time, the complete surface build-up can be carried out within one working day. For additional initial care, OLI NATURA® Refresher can then be used. When is 2K processing recommended? For heavily used floors, Scandic-Oil CLASSIC is processed with OLI NATURA® H2O-Hardener in a 10:1 ratio. The additional cross-linking increases resistance, especially to grease, water, and common household stresses. What else distinguishes OLI NATURA® Scandic-Oil CLASSIC? VOC-free, low odour, and tested for indoor use. The raw wood effect oil contains no volatile organic solvents, complies with DIN EN 71-3, is saliva and perspiration resistant according to DIN 53160, DIBt-approved, and baubook-declared. Oil-soaked pads and rags are not prone to spontaneous combustion..

MORE CROSS-LINKING. MORE DURABILITY. OLI NATURA® H2O-Hardener is the B-component or 2K hardener for OLI NATURA® Scandic-Oil CLASSIC and Scandic-Oil FOR FURNITURE. With its addition, both wood oils can optionally be processed as a powerful 2K system. The hardener supplements the normal oxidative curing of the oil with additional molecular cross-linking. This makes the surface loadable earlier, achieves a higher final hardness and gains chemical resistance. The color effect of the raw wood effect and the gloss level are hardly affected by the addition of the hardener. Add hardener. Increase durability. When is OLI NATURA® H2O-Hardener the right choice? When a wooden surface to be treated with Scandic-Oil CLASSIC or Scandic-Oil FOR FURNITURE needs to be particularly durable or cured faster. The 2K processing is particularly recommended for floors, stairs, as well as table and worktops. How is OLI NATURA® H2O-Hardener used? The hardener is added to the oil immediately before processing in a ratio of 10 parts oil : 1 part H2O-Hardener. 100 ml hardener is sufficient for 1 liter of oil, 500 ml for 5 liters of oil.Smaller quantities can also be mixed in the same proportion. The pot life is 2–3 hours. Therefore, only mix as much material as can be safely processed within this time. How quickly does Scandic-Oil cure with H2O-Hardener? By adding the B-component, curing is significantly accelerated. After a maximum of 48 hours, the surface is about 90% cured. During this time, protect the treated area from water. Temperature, humidity and air movement can influence the actual drying. What else distinguishes OLI NATURA® H2O-Hardener? The H2O-Hardener contains less than 0.1% diisocyanate monomers and is therefore not subject to training according to EU 2020/1149.

Project Oil is now one of the classics among impregnation oils and is the universal all-rounder. Thanks to its medical-grade isoparaffin content, it has a very high self-penetration. This means it is easy to apply, absorbs quickly, and does not require vigorous buffing. This makes Project Oil ideal for serial furniture production and for components with complex geometries. Project Oil is suitable for almost all indoor wood projects - whether for wooden or framed furniture, wall paneling, doors, or stairs. The solid content here is 60%, which is why a single application is completely sufficient for normally used furniture. Stairs or tabletops, however, require more protection. A second application is recommended here. The oil can be easily applied with a brush, pad, cloth, roller, sponge, or spray gun. After a short absorption time, the oil should be buffed again with a cotton cloth or oil-absorbing cloth. This minimizes differences in sheen that can result from the wood's varying absorbency. With Project Oil in "Natural", the wood's natural color is strongly enhanced. In addition, there is also the Project Oil, colored. The UV-stable pigments transparently color the wood surfaces. To test the effect of the oil, we offer a practical sample size for you.

TEAK OIL & DECKING OIL FOR OUTDOOR WOOD Sun and rain change wood. Even weather-resistant woods like teak fade and turn grey over time. Regular oiling with OLI NATURA® Yacht & Teak Oil counteracts the silver-grey patina and helps protect the wood surface from drying out and becoming brittle. The oil penetrates deep into the wood and protects from within. The surface remains open-pored and water-repellent, and the colour and grain are visibly refreshed – without a sealed film layer. Which woods and applications are suitable for OLI NATURA® Yacht & Teak Oil? For wooden decks, decking boards, garden furniture, pool surrounds and yacht decks made of suitable outdoor woods such as teak, bangkirai, Douglas fir, larch, eucalyptus, robinia, oak, ipé or cumaru. The right choice if the warm wood character is to be preserved and visibly enhanced, and you are looking for a biocide-free wood oil for outdoor use. A particular advantage is the easy maintenance: The oil penetrates the wood and remains open-pored. The oil coating does not crack, peel, or flake. Therefore, already oiled surfaces can usually be re-oiled easily without sanding. What does wood look like after OLI NATURA® Yacht & Teak Oil? The oiling gives the wood depth and warmth. Colour and grain become more prominent, and the surface remains open-pored and natural to the touch. Natural is pigment-free, but not optically colourless: like any enhancing oil, it deepens the existing wood tone. Teak is lightly pigmented, subtly supports warm wood tones, and offers increased UV protection. The colour Teak is also suitable for other wood types without changing them to an opaque teak tone. Wood type, natural colour, and sanding affect the colour tone. A sample on the original wood shows it most reliably. All colours are available as samplers. How easy is OLI NATURA® Yacht & Teak Oil to apply? Apply thinly, let it soak in, remove excess. Apply the oil evenly in the direction of the grain and polish completely after about 15 minutes. Only apply to clean, dry wood. Protect the freshly oiled surface from rain and moisture for 5–8 days afterwards. Very dry or highly absorbent wood can be oiled a second time after drying overnight. Treat dense woods like teak only thinly. One application is usually sufficient for refreshing. Already oiled surfaces can usually be maintained without sanding. Depending on the weather and use, a refresh once a year is usually sufficient, or twice if the wood is exposed to the elements. What can you rely on with OLI NATURA® Yacht & Teak Oil? Proven for many years. We have been producing OLI NATURA® Yacht & Teak Oil for over 20 years with almost no changes. We deliberately formulate it without biocides and preservatives. Therefore, the wood oil is not only suitable for outdoor use but also for suitable wood surfaces indoors.

MAINTAINING & RE-OILING WOODEN GARDEN FURNITURE Sun, rain, and use will eventually leave their marks on wooden garden furniture. Color and grain fade, and the surface can appear dry and rough. The OLI NATURA® Care Set No. 5 contains everything you need to refresh and re-oil oiled garden furniture – compactly assembled and perfectly coordinated. What is included in the OLI NATURA® Care Set No. 5? 250 ml OLI NATURA® Yacht & Teak Oil in Teak – for refreshing the warm wood tone and for regular maintenance. 2-in-1 Sanding Sponge – for smoothing rough spots and raised wood fibers. Brush – for a thin, even application of oil. Polishing Pad – for working in and polishing the oil. Oil Absorbent Cloth – for safely removing excess oil. Which garden furniture is the care set suitable for? For garden tables, garden chairs, wooden benches, garden loungers, and other outdoor furniture made of hardwood, exotic wood, and suitable outdoor woods such as teak, bangkirai, eucalyptus, or robinia. Ideal for refreshing already oiled wood – usually without complete sanding. How easy is the application? Clean the wood and let it dry completely. If necessary, smooth rough spots with the sanding sponge. Apply a thin layer of oil, let it soak in for about 15 minutes, and completely remove any excess. Then polish with the polishing pad. Everything included for easy aftercare – from smoothing to the finished oil application.

This gentle yet powerful cleaning concentrate is ideal for all outdoor wooden surfaces – from garden furniture to patio decking, made from untreated or oiled wood.It reliably removes green growth, dirt, and light signs of weathering, prevents their rapid re-formation, and optimally prepares the wood for a subsequent oil treatment. Our 1-liter concentrate is highly concentrated and is mixed with water in a ratio of 1:3 or 1:4 – but can also be applied undiluted if necessary. Sustainably packaged: The bottle body is made from 100% recycled plastic (rPET) and is fully recyclable. The child-resistant push-and-turn cap ensures safe use.

PreOilCleaner cleans thoroughly and provides optimal pre-treatment for untreated or freshly sanded wood surfaces such as furniture, stairs, parquet, and panels. It increases the absorbency of the wood and minimizes tannin reactions in tannin-rich woods like oak. Suitable for all wood types, it is diluted with water and applied before oiling. Mix the product with warm water and apply evenly using a wrung-out cotton ball or sponge until barely damp. For floors, a barely damp mop is recommended. Allow the wood surface to dry thoroughly. After complete drying, if necessary, perform an intermediate sanding, remove dust, and then treat with an OLI-NATURA oil of your choice. This product is NOT suitable for regular, daily cleaning. When using the reactive stain OLI-NATURA Antique, the surface should NOT be treated with PreOilCleaner beforehand.

Reactive Pre-Stain for Oak WoodVOC-free, water-based reactive stain for tannin-rich woods like oak. The pre-treatment reacts with natural tannins and creates authentic fuming and graying effects – more ecological and significantly easier to process than traditional ammonia fuming.Depending on the chosen shade – Limed, Fumed, or Black Fumed – different aging effects are created, from light fumed tones to deep dark black effects. The shades are intermixable.In combination with OLI-NATURA oils, particularly deep and vibrant surface appearances are achieved.Application is possible both manually and industrially (rolling, brushing, spraying, roller coater). A subsequent treatment with oil or wax is required.Prior wetting (water-popping) should be avoided, as this affects the reaction in the wood.

The Expert Against Tannin Stains Discover our OLI-NATURA Tannin Remover, your first choice for the effective removal of unwanted dark water and reaction stains on oak and other new tannin-containing woods. Formulated with oxalic acid, our tannin remover reliably neutralizes stubborn discolorations caused by the reaction of tannin with moisture and metals. Suitable for a variety of wood surfaces – whether untreated, soaped, oiled, or waxed – our product offers a versatile solution for indoor and outdoor use. Easy dosing and effective application make OLI-NATURA Tannin Remover an indispensable aid in the fight against tannin stains, preserving and restoring the natural beauty of your wood. Available in practical 50 ml dosing containers with a spout, our tannin remover offers easy and safe dosing, precisely tailored to your needs – finally an alternative to large containers. The dosing spout allows for precise application, while the screw cap in black guarantees safe storage.

Versatile solvent-based aid The low-odour and aromatic-free OLI-NATURA Oil Thinner, based on isoparaffinic hydrocarbons, is ideal for cleaning tools after oiling and for adjusting the flowability of our oils (not suitable for Scandic-Oils). It makes oils that have thickened due to storage workable again and can also be used to dissolve sticky oil films shortly after application – but only as long as the oil has not yet oxidised. Please test in an inconspicuous area beforehand. In addition, a pigmented care oil can be produced from coloured high-solid oils such as Colour-Oil, HS Hard Wax Oil (coloured) or HS Profiöl (coloured) in a mixing ratio of 2:1 (thinner:oil). Hardened oil residues cannot be removed, dissolved or eliminated with the thinner.

Anyone working with wood oil must clean their brushes thoroughly – otherwise, multiple use is out of the question. The OLI-NATURA Brush Cleaner is biodegradable, vegan, and reliably removes oils, waxes, paints, varnishes, greases, soot, tar, and bitumen – all without a pungent odor. Whether in the workshop or at home: this cleaner is a true all-rounder. Its formula is based on water, coconut fatty acid, cellulose, and natural orange peel oil from Citrus sinensis. This makes it not only gentle on natural hair bristles but also environmentally friendly. Important: It's best to immerse brushes in the organic brush cleaner immediately after use – this is the most effective way to dissolve the paint and keep the bristles nice and supple. Here's how: Simply pour some cleaner into a container, immerse the brush, and work it through until no residues are visible. Then rinse with water, pat dry, let it air dry – done!

FOR REGULAR CLEANING OF OILED WOOD SURFACES Footprints, food stains, ingrained dirt – oiled wood has to withstand a lot in everyday life. Often, a dry cloth or clear water is sufficient. Where dirt cannot be removed with these methods, OLI NATURA® Wood Soap comes into play. It cleans and cares in one step, removes everyday dirt, and also has a re-greasing effect. This preserves the natural character of the wood – versatile for use neat or diluted. Which wood surfaces is OLI NATURA® Wood Soap suitable for? For oiled, waxed, soaped, or lye-treated wood indoors – from parquet and floorboards to stairs, furniture, and other damp-wipeable wooden surfaces. Suitable for private and commercial use. When does wood need more than OLI NATURA® Wood Soap? The wood soap takes care of regular cleaning and maintenance. For heavy, old, ingrained, or deeper-seated dirt, a basic or intensive cleaning is the better choice – especially before re-oiling. If the surface appears dry, dull, or visibly worn, a care oil for oiled wood is recommended. Does OLI NATURA® Wood Soap change the appearance of the wood? The wood soap cleans without leaching the surface or forming a gray film. This leaves the wood looking clean, fresh, and naturally cared for after cleaning. How easy is OLI NATURA® Wood Soap to use? For regular cleaning, add 5–10 ml of wood soap per liter of lukewarm water and wipe damp – with a cloth or white pad on small areas, with a mop or flat mop on floors. For more stubborn dirt, apply neat to specific spots. The pH-neutral formula is gentle on skin and wood. What else distinguishes OLI NATURA® Wood Soap? The concentrate is highly concentrated, solvent-free, and has a pleasant fresh scent. The bottle body is made from 100% recycled plastic and is fully recyclable. A push-and-turn cap ensures child-safe handling.

REFRESH OILED WOOD WITHOUT CHANGING THE SHADE. Oiled wood needs care. However, especially with light surfaces, a classic care oil can deepen the wood tone again – and this is not always desired. OLI NATURA® Refresher does it differently: The colorless, VOC-free hydro care oil nourishes and regenerates oxidatively oiled wood surfaces without significantly changing their existing color character. Ideal for light, white and color-oiled surfaces. Apply thinly. Spread. Let dry. For initial care and regular refreshing – simple, fast and optically neutral. When and for what is OLI NATURA® Refresher the right choice? For oiled wood that needs to look well-maintained again. OLI NATURA® Refresher is suitable for initial care and regular refreshing of oxidatively oiled parquet and plank floors, stairs and furniture indoors – both privately and commercially. Especially when the surface appears dry or dull, but the existing color tone should be maintained. The care is low-odor, uncomplicated and quick-drying. Do you want to emphasize color depth and wood enhancement more strongly again? Then choose OLI NATURA® Wood Care Oil. For surfaces treated with hard wax oil, OLI NATURA® Wood Care Wax is the suitable care. How does OLI NATURA® Refresher change the wood look? The Refresher is pigment-free, colorless and optically neutral. It cares for the surface without introducing additional pigments or unnecessarily deepening the existing color tone. It is thus suitable for everything from raw wood optics and white oil to color-oiled surfaces. How easy is OLI NATURA® Refresher to use? Clean. Apply. Spread. Let dry. Small areas can be cared for with a cloth or white pad. On larger areas, the Refresher can be applied with a sprayer and spread with a flat mop or wiper. It is used pure and undiluted. What else distinguishes OLI NATURA® Refresher? Particularly practical: Cloths and pads soaked with Refresher are not prone to spontaneous combustion. In addition, it is VOC-free, low-odor and baubook-declared – also interesting for ecologically oriented construction and renovation projects.

Well maintained simply lasts longer. And because that's the case, we offer the necessary utensils for cleaning and caring for natural oiled wooden furniture in the practical Care Set No. 1. The Care Set No. 1 includes: 250 ml OLI-NATURA Wood Soap 250 ml OLI-NATURA Wood Care Oil 1 care flyer with step-by-step instructions and tips 1 polishing pad 1 oil-absorbing cloth 1 pair of disposable gloves (PLA-biodegradable) With the concentrated «OLI-NATURA Wood Soap», dirt can be gently removed without damaging the wood. Intensive colour refreshment and deep wood care can be achieved with the «OLI-NATURA Wood Care Oil». The special POLISHING PAD is used to massage in the care oil and the OIL-ABSORBING CLOTH is used to remove excess oil and for final polishing. Your hands stay clean with the DISPOSABLE GLOVES. We have also included detailed instructions with many tips. Resource-conscious people will be pleased to know that the care oil should always be applied sparingly. This way, a lot of beautiful natural oiled furniture can be cared for and preserved with the 250 ml can. Application: For refreshing natural oiled wooden surfaces. In case of doubt, apply a test sample in an inconspicuous area. To test the effect of the wood care oil, we offer a practical sample size. Important: Rags/pads soaked in oil can self-ignite due to heat build-up. Therefore, clean them immediately after use or store them in water.

Well-maintained simply lasts longer. And because that's the case, we offer the necessary utensils for cleaning and caring for oiled/waxed wooden furniture in the practical Care Set No. 2. Care Set No. 2 includes: 250 ml OLI-NATURA Wood Soap 250 ml OLI-NATURA Wood Care Wax 1 care flyer with step-by-step instructions and tips 1 polishing pad 1 oil-absorbing cloth 1 pair of disposable gloves (PLA - biodegradable) With the concentrated »OLI-NATURA Wood Soap«, dirt can be gently removed without damaging the wood. Intensive color refreshment and deep wood care are achieved with »OLI-NATURA Wood Care Wax«. The special POLISHING PAD is used to massage in the care wax, and the OIL-ABSORBING CLOTH is used to wipe off excess oil and for final polishing. Your hands stay clean with the DISPOSABLE GLOVES. We have also included detailed instructions with many tips. Resource-conscious people will be pleased to know that the care wax should always be applied sparingly. Thus, a whole lot of beautiful natural oiled furniture can be cared for and preserved with the 250 ml can. Application: For refreshing oiled and hardwax-oiled wooden surfaces. When in doubt, apply a test patch in an inconspicuous area. To test the effect of the wood care wax, we offer a practical sample size. Important: Cloths/pads soaked in oil can spontaneously combust due to heat buildup. Therefore, clean them immediately after use or store them under water.

CLEANING. CARING. MAINTAINING THE LOOK OF OILED WOOD. Oiled wood surfaces stay beautiful longer if cleaning and care are coordinated. The OLI NATURA® Care Set No. 3 contains everything you need for cleaning and refreshing Scandic-Oil-treated as well as white and natural-oiled wood surfaces. The wood soap cleans gently. The Refresher cares for and visually refreshes the surface in a neutral way. The pad and oil-absorbing cloth make application easier. One set. Two care steps. Everything included. What is OLI NATURA® Care Set No. 3 suitable for and when? For oiled furniture and other wood surfaces that need to look clean and well-maintained again. The set is particularly suitable for Scandic-Oil-treated, white-oiled and natural-oiled surfaces where the existing color character should be preserved. The wood soap removes dirt before care. The Refresher then regenerates the oiled surface without unnecessarily deepening the color tone. What is included in the OLI NATURA® Care Set No. 3? 250 ml OLI NATURA® Wood Soap 250 ml OLI NATURA® Refresher 1 white polishing pad 1 oil-absorbing cloth 1 care flyer with step-by-step instructions and tips How does the care system work? Clean. Refresh. Done. First, the surface is cleaned with OLI NATURA® Wood Soap. Then OLI NATURA® Refresher is applied and worked in with the white pad. The oil-absorbing cloth is used to absorb excess material and for final care. What makes the Care Set No. 3 particularly practical? All necessary products and tools are already coordinated and compiled in one set. This makes the care set suitable for both regular maintenance and for refreshing visibly dry or dull oiled surfaces. The included Refresher is VOC-free, low-odor and visually neutral. Cloths and pads soaked with Refresher also do not tend to self-ignite.

Wellness for wood: This naturally hardening care oil for oiled wood surfaces has many good properties: It restores the "faded" color of the wood, gives the surface new depth and luminosity, absorbs very quickly and fills the pores with fresh oil. This renews the protective effect and thus also the resistance. It is particularly recommended for initial care and refreshing of parquet and plank floors, stairs and wooden furniture indoors that have been treated with oxidatively drying impregnation oils. The natural oil-based care oil is not pigmented. Nevertheless, the grain and color of the wood are emphasized. Thanks to its low viscosity, it is easy to apply: For small pieces of furniture, simply apply some care product to a lint-free cotton cloth or polishing pad and wipe it over the surface to be treated. To refresh wooden stairs, apply the care oil sparingly with a polishing pad, distribute it and polish it with a cotton or oil-absorbing cloth. For the care of parquet and floorboards, the care oil can also be applied evenly and thinly with a sprayer and polished after a short drying time with a polishing pad by hand or with a single-disc machine. The wood care product contains only the necessary ingredients for its purpose. The main component is refined linseed oil, which is supplemented with medical-grade isoparaffin for optimal self-penetration. WHEN TO CARE? The frequency with which the wood surface needs to be refreshed depends on its use. Good indications that the surface needs care are when the water resistance decreases, the color depth fades and/or the surface feels dry and dull. Then it should be re-oiled. The care oil is also available in the Care Set No. 1. To test the effect of the oil, we offer a practical sample size for you.

Wood wellness: This naturally hardening care wax combines oil and wax in one product. It is particularly recommended for initial treatment and refreshing of parquet and plank floors, stairs, and wooden furniture indoors that have been treated with our oxidatively drying hard wax oils. The oil refills the wood pores with fresh oil, and the wax creates a fine surface film. This renews the protective effect and thus the resistance. The care wax is not pigmented. Nevertheless, the color depth is subtly enhanced again. Thanks to its low viscosity, it is easy to apply: For small pieces of furniture, simply apply a little polish to a lint-free cotton cloth or polishing pad and wipe it over the surface to be treated. For refreshing wooden stairs, apply the care wax sparingly with a polishing pad, spread it, and polish it with a cotton cloth or oil-absorbing cloth. For the care of parquet and plank floors, the care wax can also be applied evenly and thinly with a sprayer and, after a short exposure time, polished with a polishing pad by hand or with a single-disc machine. The wood care product contains only the necessary ingredients. This care wax is based on refined linseed oil and carnauba wax. The medical-grade isoparaffin ensures good self-penetration, which makes it so easy to apply. When to care? The frequency with which the wood surface needs to be refreshed depends on its use. Good indicators for the need for care are when the water resistance and color depth diminish and/or the surface feels dry and dull. Then it should be re-oiled. The care oil is also available in the Care Set No. 2. To test the effect of the oil, we offer a practical sample size.

OLI-NATURA Worktop-Oil 2C BLACKLABEL 2K Worktop Oil for Wood and Wood-Epoxy Surfaces From the Blacklabel Edition. Developed with Jungo Design – for river tables, epoxy resin tables, wood-epoxy worktops, as well as other high-quality wood and wood-epoxy projects. The pre-packaged 2K system consisting of 500 ml Worktop-Oil and 100 ml Hardener combines the requirements of wood and epoxy resin in a consistent surface concept. The 100% high-solid formulation based on linseed oil and tung oil ensures maximum wood saturation, intensive accentuation, and a resistant, water-repellent surface. The chemically cross-linking oil-hardener system increases resistance, especially against moisture exposure and the fine sanding often found in wood-epoxy applications. Set to high transparency – for a natural wood look without a hazing effect. The pigment-free system can be applied over the entire wood and epoxy resin surface. After polishing the resin areas, an optically and haptically homogeneous surface is created without disruptive transitions between wood and epoxy resin. Ideal for river tables, epoxy resin tables, wood-epoxy worktops, designer furniture with resin inlays, as well as high-quality objects and unique pieces. Result: Matt, tactile finish with natural depth effect, high transparency, and excellent suitability for everyday use.