The OLI NATURA® H2O-Hardener is the B component for OLI NATURA® Scandic-Oil Classic and Scandic-Oil For Furniture. The additional cross-linking supports full curing and can accelerate curing as well as increase the chemical resistance of the treated surface.
The areas of application depend on the respective Scandic-Oil. Shortly before application, thoroughly mix the hardener with the oil in the specified ratio.
Mixing ratio by volume - oil : hardener
10:1 - Scandic-Oil Classic and Scandic-Oil For Furniture
-
1 liter of oil + 100 ml of hardener
-
2.5 liters of oil + 250 ml of hardener
-
5 liters of oil + 500 ml of hardener
Only mix the required quantity and use immediately. Follow the information in the technical data sheet for the respective Scandic-Oil.
Pot life: 2-3 hours. Do not use after this period.
Mixing and application
- Shortly before application, mix H2O-Hardener in a ratio of 10:1 (oil : hardener) by volume thoroughly with OLI NATURA® Scandic-Oil Classic or Scandic-Oil For Furniture Do not mix on the wooden surface.
- Mix only the required quantity and apply immediately. Do not return mixed material to the original container.
- Prepare the surface and apply according to the technical data sheet for the respective Scandic-Oil.
Pot life
- Apply the oil-hardener mixture within 2–3 hours Do not apply after the pot life has expired.
- Application conditions and drying
Do not apply below
- +15 °C Observe the temperature specifications and relative humidity information in the technical data sheet for the respective Scandic-Oil. Ensure adequate ventilation during and after application.
- Observe the drying times and load-bearing capacity specified in the technical data sheet for the respective Scandic-Oil. Protect from water until fully cured.
- Further information:
Before application, refer to the Technical Data Sheet and Safety Data Sheet in the "Downloads" section. beachten.
Information on diisocyanate training
The product contains less than 0.1% by weight of diisocyanate monomers. No diisocyanate training is required under Regulation (EU) 2020/1149. Required instructions and protective measures remain in place.
Labelling in accordance with Regulation (EC) No 1272/2008 (CLP)
UFI: RU70-DVY7-3N09-HQEU
Signal word: Warning
Hazardous component: Aliphatic polyisocyanate.
Hazard statements
- H317: May cause an allergic skin reaction.
- H332: Harmful if inhaled.
- H335: May cause respiratory irritation.
- H412: Harmful to aquatic life with long-lasting effects.
Precautionary statements
- P102: Keep out of reach of children.
- P261: Avoid breathing dust/fume/gas/mist/vapours/spray.
- P273: Avoid release to the environment.
- P280: Wear protective gloves/protective clothing/eye protection/face protection/hearing protection.
- P302+P352: IF ON SKIN: Wash with plenty of water and soap.
- P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing.
- P312: Call a POISON CENTER/doctor if you feel unwell.
- P333+P313: If skin irritation or rash occurs: Get medical advice/attention.
- P403+P233: Store in a well-ventilated place. Keep container tightly closed.
Supplemental hazard statement
Contains isocyanates. May produce an allergic reaction.
