Does OLI-AQUA NORDIC 18.40 preserve the natural wood color?
Yes, NORDIC preserves the raw wood character with minimal darkening. The wood initially appears darker during application; this color deepening disappears as it dries. A test application shows the final effect.
Does wood treated with OLI-AQUA NORDIC 18.40 look untreated?
The ultra-matte finish makes the wood look largely untreated. The color and grain remain the focus, while an almost invisible lacquer layer protects the surface.
Which surfaces is OLI-AQUA NORDIC 18.40 suitable for?
For wood and wood-based materials indoors - on both light and dark woods, such as oak, ash, maple, and walnut. Ideal for furniture, cabinets, kitchen fronts, doors, stairs, and panels.
Is OLI-AQUA NORDIC also available in colors?
Yes, as OLI-AQUA NORDIC B, the lacquer is also available in colored variants. These also create an ultra-matte finish.
Is OLI-AQUA NORDIC 18.40 non-yellowing?
Yes, the lacquer finish is non-yellowing. The natural color development of the wood caused by light and aging remains unaffected.
What distinguishes OLI-AQUA NORDIC 18.40 from a raw wood effect oil?
NORDIC forms a protective lacquer layer on the surface. A raw wood effect oil, on the other hand, penetrates the wood and protects it from within. Both preserve the natural raw wood character.
Is OLI-AQUA NORDIC 18.40 suitable for stairs?
Yes, the tested 1K and 2K coatings achieve slip resistance class R10 according to EN 16165.
Can I apply OLI-AQUA NORDIC 18.40 by brush or roller?
Yes, NORDIC can be applied by brush, roller, or spray. One product is sufficient for both the primer and topcoat.
How do I prepare wood for OLI-AQUA NORDIC 18.40?
Sand the clean, dry surface with P150–180 and remove all dust thoroughly. The wood must be free of oil, wax, grease, and silicone.
How many coats of OLI-AQUA NORDIC 18.40 are required?
Two coats with intermediate sanding. After approx. 1.5 hours intermediate-sand the first coat: when brushing, use P220–280; when spraying, use P240. Remove dust and apply another coat.
When should I use OLI-AQUA NORDIC 18.40 with hardener?
For higher chemical and mechanical resistance. OLI-AQUA Hardener 13.2 is also recommended for resinous woods with a high content of wood constituents, such as pine. OLI-AQUA Hardener 13.2.
How do I mix OLI-AQUA NORDIC 18.40 with hardener?
Mix 10 parts lacquer with 1 part OLI-AQUA Hardener 13.2 by volume. This corresponds to 1 liter of lacquer plus 100 ml of hardener. Stir thoroughly, 10 minutes let stand, and use within the 3-hour pot life .
How do I thin OLI-AQUA NORDIC 18.40 for spraying?
For 1K application, dilute with 5–10% tap water. For 2K application with a cup gun, add a maximum of 5% tap water if necessary.
How much coverage does OLI-AQUA NORDIC 18.40 provide?
When brushing, approx. 10–12 m²/l; when spraying, approx. 8–10 m²/l per coat. Plan for two coats for the finished surface.
How quickly does OLI-AQUA NORDIC 18.40 dry?
Dust-dry after approx. 45 minutes, sandable and recoatable after approx. 1.5 hours, stackable after approx. 16 hours. Drying times depend on climate, air exchange, and the amount applied.
