Oiling light wooden furniture with white is not only an aesthetic improvement but also offers practical benefits, such as reducing the wood's natural darkening. In this article, we'll tell you which types of wood particularly benefit from the white-pigmented OLI-NATURA Colour Hard Wax Oil in Light White, how best to proceed, and what details you should pay special attention to. We'll guide you step by step through the process, explain the best techniques, and provide valuable tips.
Preserving Light Wooden Furniture with White UV Protection Oil
A simple, timeless interior design brings light and airiness into your home and creates a natural, cozy atmosphere. Furniture made from light wood like pine, fir, or spruce fits perfectly. However, wood changes its color over time: dark wood lightens, and light wood darkens. The best way to keep light wooden furniture light is with the pigment oil OLI-NATURA Colour Hard Wax Oil in Light White. This oil-wax combination contains mineral white pigments with a UV filter, which act like sunscreen and significantly reduce the darkening of the wood.
Selecting the Right Wood for Optimal Color Effect
Of course, there are many other light wood types that harmonize wonderfully with Colour Hard Wax Oil in Light White. Besides pine, fir, spruce, or larch, these include maple, birch, ash, and light oak. The white of the oil is transparent and gives the wood a gentle tint, so the natural grain and structure remain visible. The exact shade depends on the base tone of the wood. A test oiling on a hidden spot can provide clarity here.
Factors Influencing Color Intensity During Oiling
The color effect of the oil depends not only on the wood type but also on the final sanding and the amount of oil applied. A second oiling, prior wetting, or coarser sanding can enhance the color intensity. Generally, the final sanding should not be finer than 240 grit, as too fine sanding compacts the wood pores, preventing pigments from penetrating.
Proper Application of White Pigment Oil
Applying OLI-NATURA Colour Hard Wax Oil in Light White is easy. The wood should be untreated or freshly sanded. Apply the oil with a brush or pad and buff off excess oil after a short drying time. Excess oil must not remain on the surface. Allow the freshly oiled surface to remain undisturbed for at least one day so that the oil can penetrate the pores and the color pigments can anchor. A second coat can be applied no earlier than 24 hours later. A common mistake is to apply the oil twice in direct succession without waiting for the necessary intermediate drying. In this case, the wood pores cannot absorb the oil quickly enough, it remains on the surface and must be removed to avoid stickiness. Therefore, two applications with appropriate drying time in between ensure the best result.
Importance of Curing Time
While the colored wood oil quickly shows what the final result will look like, the complete curing of the oil still takes a few days. Even if the furniture feels dry on the surface, the oil inside the wood needs about 3-5 days to properly cure. Good ventilation is very helpful, as this process requires oxygen. During this time, you should treat the freshly oiled surface gently: avoid water contact and refrain from wet cleaning. This ensures that your piece of furniture can cure perfectly.
Care and Cleaning of Light Oiled Wood
The lighter the wood, the more sensitive to stains? Not necessarily! The crucial thing is that the freshly oiled furniture has completely cured. Afterwards, the surfaces can be easily cleaned with a damp cloth and refreshed at any time by re-oiling. Stains and fine scratches can be repaired by sanding and re-treating with the appropriate care product, without having to sand down the entire piece of furniture.
Protection and Aesthetics Through Professional Oil Treatment
While the oil penetrates deep into the wood, the wax forms a thin surface film that is robust, water-repellent, and dirt-repellent. The wood can breathe – and especially with light wood, the natural structure and appearance of the natural material truly come into their own. By buffing the wet oil with a white polishing pad, the wood acquires a pleasant, silky-matte, and natural touch. The wood remains open-pored, not only looking great but also retaining its natural feel.
Step by Step:
Process the oil at room temperature and stir thoroughly to ensure an even distribution of pigments.
Pour the required amount into a glass or plastic bowl or directly onto the surface.
Apply the oil along the grain and let it penetrate for about 15-20 minutes.
Then level and buff the wet colored oil with a white polishing pad.
If excess oil remains that cannot be buffed off with the white pad, remove it with a cloth.
The surface must then feel dry to the touch.
If necessary, repeat the process no earlier than 24 hours later.
Allow the freshly oiled surface to fully cure for several days. During this time, treat it gently and avoid water contact. Afterward, it will be water and dirt-repellent.
Start your project today!
With these steps, you'll achieve an even color finish that highlights the natural beauty of your wood. Let your creativity run wild and give your furniture a stylish Scandic look. If you have questions about the product or its application, we are happy to help. Email: faq@oli-lacke.de | Tel: +49 (0) 37208/84-488.
