ALL PALLETS - Build and Protect Furniture from Pallets

TEAK OIL & DECKING OIL FOR OUTDOOR WOOD Sun and rain change wood. Even weather-resistant woods like teak fade and turn grey over time. Regular oiling with OLI NATURA® Yacht & Teak Oil counteracts the silver-grey patina and helps protect the wood surface from drying out and becoming brittle. The oil penetrates deep into the wood and protects from within. The surface remains open-pored and water-repellent, and the colour and grain are visibly refreshed – without a sealed film layer. Which woods and applications are suitable for OLI NATURA® Yacht & Teak Oil? For wooden decks, decking boards, garden furniture, pool surrounds and yacht decks made of suitable outdoor woods such as teak, bangkirai, Douglas fir, larch, eucalyptus, robinia, oak, ipé or cumaru. The right choice if the warm wood character is to be preserved and visibly enhanced, and you are looking for a biocide-free wood oil for outdoor use. A particular advantage is the easy maintenance: The oil penetrates the wood and remains open-pored. The oil coating does not crack, peel, or flake. Therefore, already oiled surfaces can usually be re-oiled easily without sanding. What does wood look like after OLI NATURA® Yacht & Teak Oil? The oiling gives the wood depth and warmth. Colour and grain become more prominent, and the surface remains open-pored and natural to the touch. Natural is pigment-free, but not optically colourless: like any enhancing oil, it deepens the existing wood tone. Teak is lightly pigmented, subtly supports warm wood tones, and offers increased UV protection. The colour Teak is also suitable for other wood types without changing them to an opaque teak tone. Wood type, natural colour, and sanding affect the colour tone. A sample on the original wood shows it most reliably. All colours are available as samplers. How easy is OLI NATURA® Yacht & Teak Oil to apply? Apply thinly, let it soak in, remove excess. Apply the oil evenly in the direction of the grain and polish completely after about 15 minutes. Only apply to clean, dry wood. Protect the freshly oiled surface from rain and moisture for 5–8 days afterwards. Very dry or highly absorbent wood can be oiled a second time after drying overnight. Treat dense woods like teak only thinly. One application is usually sufficient for refreshing. Already oiled surfaces can usually be maintained without sanding. Depending on the weather and use, a refresh once a year is usually sufficient, or twice if the wood is exposed to the elements. What can you rely on with OLI NATURA® Yacht & Teak Oil? Proven for many years. We have been producing OLI NATURA® Yacht & Teak Oil for over 20 years with almost no changes. We deliberately formulate it without biocides and preservatives. Therefore, the wood oil is not only suitable for outdoor use but also for suitable wood surfaces indoors.

Boiled linseed oil is "New Old School" - an almost forgotten traditional coating that was once commonly used for wooden surfaces and building elements - both indoors and outdoors. In 2015, we rediscovered the traditional recipe, carefully developed it further, and had it tested for contact with food. Today, boiled linseed oil is one of the most original ways for many manufacturers and wood lovers to naturally protect wood: for cutting boards, end grain, kitchen wood, turned works as well as bowls, knife handles, toys, bird & bee houses, windows and doors. Our boiled linseed oil is produced in a gentle cooking process exclusively from pure, cold-pressed linseed oil. For faster and more uniform drying, we only add a minimal amount of a modern drying agent to the recipe. Further additives and solvents are taboo. Moreover: our boiled linseed oil is LFGB-tested and suitable for wooden surfaces with food contact. After application, the boiled linseed oil forms a permanent bond with the wood and creates a water-repellent layer. The application remains deliberately simple: apply generously with a cotton cloth or brush, let it soak in briefly, and wipe off excess oil. After sufficient drying, the application can be repeated several times. Usually, two to three coats are sufficient. The wood appears livelier, warmer, and richer in tone. Light woods develop a natural honey tone.

OLI NATURA® Hard Wax Oil for almost all interior wood surfaces Oil impregnates. Wax protects. OLI NATURA® Hard Wax Oil is the ECARF-certified oil-wax combination for almost any interior wood project. The oil impregnates the wood from the inside, while the wax additionally protects the surface with a fine protective film. Which types of wood and applications is OLI NATURA® Hard Wax Oil suitable for?  OLI NATURA® Hard Wax Oil is the right choice if you are looking for a classic hard wax oil that can be used for almost all interior wood projects – instead of having a different wood oil in the cupboard for each application. Whether it's furniture, dining tables, kitchen worktops, stairs, doors, wall paneling or window sills – the oil-wax combination is suitable for almost all types of wood and wood-based materials, including maple, beech, oak, ash, spruce and pine, as well as cork, bamboo, OSB, plywood and multiplex. The hard wax oil is particularly suitable if light woods are only to be subtly deepened in color and you want an easy-to-apply, open-pored and repair-friendly surface. Do you want a transparent colored look? Then choose OLI NATURA® COLOUR Hard Wax Oil – also in Cotton White for the popular Scandi look. Do you prefer the stronger color deepening of a classic impregnating oil? Then OLI NATURA® Project Oil is the right choice. What does wood look like after OLI NATURA® Hard Wax Oil? The natural wood look is preserved. Grain and structure are subtly highlighted, and the surface remains open-pored and tactile. The subtle color deepening harmoniously brings out particularly light wood species. The result is a silky matte finish. For an even more matte appearance, the surface can be polished during the wet phase with a white oil pad. How easy is OLI NATURA® Hard Wax Oil to apply? The oil-wax combination can be applied easily and evenly. For furniture, one coat is usually sufficient. For stairs and heavily used worktops, a second coat is recommended – without intermediate sanding. Hard wax oil is not varnish. Apply thinly – that's enough. The surface is durable, dirt and water repellent, and easy to care for. Scratches and signs of wear can be repaired locally or simply refreshed at any time – without sanding. The oil does not crack, peel, or flake. What can you rely on with OLI NATURA® Hard Wax Oil? After complete curing, the surface is harmless to humans, animals, and plants. Tested for everyday use: ECARF-certified (allergy-friendly), food contact-tested (LFGB), suitable for children's toys, and approved by building authorities.